Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for DNA TOOLS-00169
- Page 1 INSTRUCTION MANUAL Cordless Ratchet Wrench TOOLS-00169/00170 Power tool...
- Page 2 DESCRIPTION OF THE SYMBOLS The use of symbols in this manual is intended to draw your attention to possible risks. The safety symbols and the explanations that accompany them must be perfectly understood. The warnings in themselves do not remove the risks and cannot replace correct actions for preventing accidents.
- Page 3 GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"...
- Page 4 d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Page 5 eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
- Page 6 3. LED work light 4. On-off switch TECHNICAL SPECIFIATIONS Power 12 V Speed 300/min Max. Torque 45Nm Chuck size 3/8” Noise Sound pressure level 80 dB(A) K=3 dB(A) Sound power level 91 dB(A) K=3 dB(A) Vibration level a 11,64 m/s² k= 1,5 m/s² NOISE/VIBRATION INFORMATION Measured sound values determined according to EN 62841.
- Page 7 rapid charger. Always inspect battery charger, cord and plug before use. Always have damage repaired by a qualified professional. Protect battery charger against humidity and operate only in dry areas. The supplied charger is suitable for charging batteries only. Charging the battery To start the charging process plug the charger into the battery, then plug in the battery charger to the main The battery and charger become warm during the charging process, this is normal.
- Page 8 Use only identical spare parts for repairing a tool. Caution! Ensure that the batteries are charged using the correct charger recommended by the manufacturer. Attention! After long time storage, the battery capacity will be reduce. In order to maintain battery capacity, we recommend that only store full charged batteries and top-up the charge from time to time.
Need help?
Do you have a question about the TOOLS-00169 and is the answer not in the manual?
Questions and answers