Advertisement
(9)
ATTACHING HANDLE & ACCESSORY TRAY TO FRONT SUPPORT
3. PLACE THE TELESCOPE OTA ONTO
DOBSONIAN MOUNT AND TIGHTEN
THE KNOBS ON THE SIDE, BUT DO
NOT OVER TIGHTEN.
4. LOOSEN THUMB SCREWS ON SIDE OF FINDER AND
SLIDE FINDER ONTO DOVETAIL MOUNT LOCATED
AT TOP OF MAIN TELESCOPE TUBE.
TIGHTEN THUMB SCREWS.
5. THE COLLIMATION SPOT ON THE PRIMARY
MIRROR IS FOR THE OPTICAL ALIGNMENT
OF THE TELESCOPE, AND IS NOT A DEFECT.
SEE PAGE 7 FOR COLLIMATING INSTRUCTIONS.
IF YOU NEED ANY FURTHER HELP WITH YOUR GALILEO TELESCOPE
PLEASE CALL US @ 305-245-8444 MON-FRI 9AM - 5PM E.S.T
OR E-MAIL US AT CUSTOMERSERVICE@COSMOSOPTICS.COM
(10)
8
(11)
ATTACHING BEARING
SUPPORTS
Advertisement
