Table of Contents
Advertisement
Quick Links
At less than 130mm (5 inches) in length, Juni is the smallest framing projector on the market.
Gantom collaborated with top lighting designers in themed entertainment and architecture to create
the most precise lighting tool for space-constrained environments. With zoom optics and multiple
mounting configurations, Juni provides specifiers with design flexibility in a wide range of
applications. For permanent installations, every adjustable mechanism is fully lockable (including
shutters) to assure fixture focus when the designer steps away. All this in a fixture that's smaller than
your smartphone!
Juni has a matte-black anodized aluminum finish with silver available by custom quotation. Juni is
available in 12VDC PWM or DMX (see Juni DMX) dimming options. There are 3 available mounting
options: standard screw-mount yoke, recessed canopy, and track.
Features
o Ultra-compact design < 130mm (5 inches) long
o Class 2, low-voltage 12VDC input (DO NOT HOT PLUG)
o Adjustable zoom and focus lenses
o Interchangable lens tubes with a beam angle range of either 25-38° or 42-60°
o 3000K 90CRI or 6000K LED options available
o Tri-plane shutter system
o Accepts 19mm steel or glass gobo (up to 2mm thick)
o Dims with most dimmable 12VDC power supplies
o Machined aluminum body in silver or black finishes
o Track adapter and canopy mount available
Available Models:
Item Number
GT81
GT82
GT83
GT84
TL281
TL282
TL283
TL284
Phone: 407-857-8770
Distributor:
Fax: 407-857-8771
Email: sales@techni-lux.com
www.techni-lux.com
GANTOM JUNI USER GUIDE
Gantom Juni - Cool White - Black Finish - Pro Cable Connector
Gantom Juni – Warm White - Black Finish - Pro Cable Connector
Gantom Juni - Cool White - Black Finish – Wide Lens - Pro Cable Connector
Gantom Juni – Warm White - Black Finish – Wide Lens - Pro Cable Connector
Gantom Juni - Cool White - Black Finish - Eutrac Low Voltage Adapter
Gantom Juni – Warm White - Black Finish - Eutrac Low Voltage Adapter
Gantom Juni - Cool White - Black Finish – Wide Lens - Eutrac Low Voltage Adapter
Gantom Juni – Warm White - Black Finish – Wide Lens - Eutrac Low Voltage Adapter
Gantom Juni User Guide
Item Description
Version 1.0 – 3/31/2021
Advertisement
Table of Contents
Related Manuals for Gantom Juni
Summary of Contents for Gantom Juni
- Page 1 GANTOM JUNI USER GUIDE At less than 130mm (5 inches) in length, Juni is the smallest framing projector on the market. Gantom collaborated with top lighting designers in themed entertainment and architecture to create the most precise lighting tool for space-constrained environments. With zoom optics and multiple mounting configurations, Juni provides specifiers with design flexibility in a wide range of applications.
- Page 2 The Gantom Juni has a maximum wattage of 9W and and requires 12VDC power. This fixture is compatible with dimmable 12VDC constant voltage LED drivers. Generally, PWM dimmers which work with 12VDC LED tape will also work with the Juni. Here is a diagram showing how this fixture could be connected to a 0-10VDC dimmer switch: The Gantom Juni has bare wires for power input, and includes a screw terminal adapter which allows you to connect the fixture to a standard 2.1mm DC barrel jack.
-
Page 3: Mounting Instructions
426-8661). MOUNTING INSTRUCTIONS The Gantom Juni micro framing projector comes with an aluminum mounting yoke pre-installed. It is meant to be used with ¼” size hardware, but please note that mounting hardware is not included with the fixture. The yoke has a center hole (1) and a curved slot (2). Install a screw in the center hole first, then loosely screw down a second screw through the curved slot. - Page 4 Once the fixture has been mounted, you can complete the aiming of the fixture. The fixture is adjustable in the following ways: When you have the light pointed in the correct orientation, tighten the locking screws in the indicated locations. Gantom Juni User Guide Version 1.0 – 3/31/2021...
-
Page 5: Focal Adjustment
When you have finished focusing the lenses, replace the lens tube cover and tighten the set screws back down to hold the lens tube in place. Gantom Juni User Guide Version 1.0 – 3/31/2021... -
Page 6: Changing The Lens Tube
CHANGING THE LENS TUBE To accommodate a wide range of beam angles there are multiple lens tubes available for the Juni fixture. To change the lens tube, remove the lens tube cover as shown in the “Focal Adjustment” section above. Next, unscrew the lens tube from the light engine. -
Page 7: Gobo Installation
GOBO INSTALLATION A gobo can be a great way to add texture and dimension to your application. The Gantom Juni micro framing projector accepts glass and stainless steel gobos with an outer diameter of 19mm. The maximum image size for patterns is 15mm and the maximum image size for text is 10mm. Both stainless steel and full color glass gobos are available to fit the Gantom Juni. - Page 8 Next, screw the gobo retention ring back into the hole until it is firmly seated and holding the gobo in place. Once the gobo is in place within the retainer system, reattach the lens tube, focus your optics to your desired effect, then reattach the lens tube cover. Gantom Juni User Guide Version 1.0 – 3/31/2021...
- Page 9 SHUTTER ADJUSTMENT AND LOCKING The Gantom Juni features 4 independently adjustable framing shutters which are perfect for creating rectangles, triangle, trapezoids, slits, or irregular shapes for selective lighting. This gives you the ability to add a crisp angular edge to your beam. This feature is perfect for highlighting a table or piece of art with minimal light spill.
-
Page 10: Installing Accessories
Product Support: We hope that this guide has been effective for learning how to use your Gantom Juni or Gantom Juni DMX light fixture. However, if you run into a wiring issue, a bug in the software, or just a light that doesn’t seem to want to cooperate, we at Gantom are ready to help you out! Just send an email to...
Need help?
Do you have a question about the Juni and is the answer not in the manual?
Questions and answers