LG S62T1-C Service Manual page 65

DIGITAL DISPLAY & MEDIA TRAINING MASTER
11-2. When no Access Points or SSID after access point searching
Possible Solutions (By router configuration change)
1. Check that country setup of AP. The country setup should be set in
each country.
2. Check frequency band using now. The BD-HTS can operate in
2.4 GHz band not 5 GHz.
3. Check channel of band frequency. Available channel is different in
each country.
For example,
- U.S , Canada : 1 ch ~ 11 ch
- Korea, Europe : 1 ch ~ 13 ch
- Japan : 1 ch ~ 14 ch
4. Check the broadcasting SSID function of AP, make it enable.
5. If the result of the above check items is not valid, try the below process.
Check whether.
wireless router radio is enabled or not.
Check whether.
SSID broadcast is enabled or not.
Power off AP and on, then restart AP.
Change channel setup.
Ex) 1 ch --> 6 ch --> 11 ch
Change channel setup again.
Ex) 1 1ch --> auto
Reset AP to be factory initial status.
Move BD-HTS to AP around.
If not working
If not working
If not working
If not working
If not working
If not working
2-52