Download Print this page

Adexa XC-218L Operation Instructions Manual

Refrigerated display cabinet

Advertisement

Quick Links

Refrigerated display cabinet
Operation instructions
XC-218L
XC-238L
XC-278L
1

Advertisement

loading

Summary of Contents for Adexa XC-218L

  • Page 1 Refrigerated display cabinet Operation instructions XC-218L XC-238L XC-278L...
  • Page 2: Table Of Contents

    Thank you for choosing and purchasing our product. Please carefully read the operation instructions before use for a correct application and satisfactory effect. Contents General Structure and Parts Handle and Erection Preparation and Power Supply Use and Caution Maintenance Trouble Shooting Principle of Refrigeration System Circuit Diagram Major Parameters...
  • Page 3: Structure And Parts

    General 1. Top brand fully enclosed compressor is used on the desk-top refrigerator. The refrigerant R290 is of an environmentally friendly agent. It features a rational configuration of refrigeration system with blower forced air cooling. The temperature is quite even inside the refrigerator. 2.
  • Page 5: Handle And Erection

    Handle and Erection Handle with care Unplug the wall socket first. Never tilt it over 45 degree during handling Dry place Always locate the refrigerator at a dry place. Sufficient space The distance from both sides and back of refrigerator to wall or other substance must not less than 10cm.The refrigeration capability might be decreased if its surround space is too small to circulate air.
  • Page 6: Preparation And Power Supply

    No hole making Never make hole on the refrigerator. Never install other matter on the refrigerator. Stable location Unpacking and locate the refrigerator on a flat and solid place. Preparation and Power Supply Exclusive power socket Normally, the power supply should be 220-240V, single phase AC with exclusive single phase three pin receptacle (250V 10A) and fuse (6A).The power receptacle must have a reliable earth connection.
  • Page 7 No water flushing Never give the refrigerator surface a flush otherwise current leakage might be resulted. Prevent from flammables and explosive Never put any flammable or explosive inside the refrigerator such as ether, gasoline, alcohol, adhesive and explosive. Never put dangerous product nearby the refrigerator. No spray To spray the flammables such as paint or coating nearby the refrigerator is not allowed, otherwise fire might be resulted...
  • Page 8: Use And Caution

    Use and Caution 1. Before use: Plug the refrigerator on 220-240V~ exclusive socket. After the refrigerator running,put hand on the air suction to confirm it is sufficient cold. Then you may put food inside the cold box. Digital Temperature controller Features Of Function - It is a mini-sized and integrated intelligent controller and applicable to the compressor of one Hp.
  • Page 9: Trouble Shooting

    sensory or mental capabilities,or lack of experience and knowledge. The maximum loading of the Shelf does not exceed 10 kg. The climatic class of the appliance is 4,the Units are suggested to be used at 16℃-32℃ ambient temperature. WARNING Keep clear of obstruction all ventilation openings in the appliance enclosure or in the structure for building-in Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer...
  • Page 10: Principle Of Refrigeration System

    Note Following phenomena are not troubles The murmur of water is heard when the refrigerator is working. It is a normal phenomenon as the coolant is circulating in the system. In wet season, condensation might be found on the outside of the refrigerator. It is not a trouble, which is caused by high humidity.
  • Page 11: Circuit Diagram

    Circuit Diagram Major Parameters Model XC-218L XC-238L XC-278L Coolant and injection quantity R290(55g) R290(70g) General Rated Input Power (W) Kind of weather Refrigeration temperature(Cº) 0-12 Electric shock protection class Rated Voltage(V) 220-240~ Rated Frequency(Hz) Rated Current (A) 2.22 Lamp Power (W):...
  • Page 12 Note 1. The electric circuit diagram and parameters on the product name plate are final ones if they have been changed. 2. The design might be improved without notice. 3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

This manual is also suitable for:

Xc-238lXc-278l