Table of Contents
Advertisement
Quick Links
TruVision DVR 44HD Quick
Start Guide
Figure 1: Back panel connections
1. Connect one audio input to RCA connector.
2. Connect to speakers for audio output.
3. Line in.
4. Connect one CCTV monitor (BNC-type
connector).
5. Connect to a RS-232 device.
6. Connect eSATA
7. Connect up to 16 analog cameras to BNC-type
connectors (depends on the recorder model).
8. Connect to an optional USB 2.0 device such as
a mouse, CD/DVD burner or HDD.
P/N 1072969-EN • REV A • ISS 14APR15
© 2015 United Technologies Corporation. Interlogix is part of UTC Building & Industrial Systems, a unit of United
Technologies Corporation. All rights reserved.
(16-channel model shown)
9. Connect to a HDTV. The HDMI connection
supports both digital audio and video.
10. Connect to a VGA monitor.
11. Connect to a network.
12. Connect up to 16 alarm inputs, such as
detectors, push buttons, etc.
13. Connect up to four alarm outputs, such as a
siren, flash, relay.
14. Connect to ground.
15. Connect a power cord to the PSU (included).
16. Power switch (on/off).
Advertisement
Table of Contents
Related Manuals for United Technologies TVR-4416HD-16T
Summary of Contents for United Technologies TVR-4416HD-16T
- Page 1 CD/DVD burner or HDD. 16. Power switch (on/off). P/N 1072969-EN • REV A • ISS 14APR15 © 2015 United Technologies Corporation. Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies Corporation. All rights reserved.
- Page 2 Figure 2: Front panel controls (8-channel model shown) Display buttons. Used in live view mode. 5. Receiver for IR remote control. Press Display to toggle through the single 6. PTZ buttons: and multiviews. Zoom Press to use + and – for digital zoom. Press to start/stop sequencing in live Preset...
-
Page 3: Package Contents
Figure 3: Quick access toolbar 1. Pause: Freeze live image of the selected 6. PTZ Control: Enter PTZ control mode. camera. 7. Digital Zoom: Enter digital zoom mode. 2. Start Manual Recording: Start/stop manual 8. Image Settings: Modify the image lighting levels. recording. -
Page 4: Operating The Recorder
By default, the setup wizard will start once the To connect the remote control to the recorder has loaded. The wizard walks you recorder: through some of the more important settings Menu 1. Press on the front panel or right-click of your recorder. -
Page 5: Live View Mode
Menu • Subnet mask - 255.255.255.0 • Right-click the mouse and select from the pop-up menu. • Gateway address - 192.168.1.1 The main menu screen appears. Move the • Server Port: 8000 mouse over a command icon in the menu •... -
Page 6: Specifications
View system information. Provides reference information to the various toolbars and menus within the interface. Provides access to logout, reboot and shutdown options. Specifications Power supply 100 to 240 VAC, 6.3 A, 50 to 60 Hz Power consumption (without HDD): TVR 4408 ≤...