Advertisement
Assembly/Operating Instructions
Assembling the bassinet:
1
2
Lay the SLEEPER FRAME face down
Plug in FRONT AND BACK FEET (2
on a flat surface.
sets) into SLEEPER FRAME LEGS by
lining up the buttons and holes on the
Holding the CENTRAL SUPPORTING
inside of the legs until you hear a click.
STRUCTURE, open both of the
The FEET should sit flat on the floor
LEGS outward.
when the BASSINET is upright.
3
4
Plug in MIDDLE SUPPORT BAR
Insert MIDDLE SUPPORT BAR into
KNUCKLES to FRAME on each side
FRAME on each side until you hear a
matching the engraved "L" and "R" on
click. NOTE: You may need to spread
the KNUCKLES to the "L" and "R" on
the FRAME slightly to insert the
the FRAME.
MIDDLE SUPPORT BAR.
4
Advertisement
