Indicator
Name
Security System
Alarm Indicator
System
Message
Indicator
*1:On the left: Models without full color display
On the right: Models with full color display
On/Blinking
Blinks when the security system
●
alarm has been set.
Comes on for a few seconds when
●
you set the power mode to ON,
then goes off.
Comes on along with a beep when
●
a problem is detected. A system
message on the multi-information
display appears at the same time.
Explanation
2 Security System Alarm P. 139
While the indicator is on, press the
●
/
(information) button to see
the message again.
Refer to the Indicators information in
●
this chapter when a system message
appears on the multi-information
display. Take the appropriate action for
the message.
The multi-information display does not
●
return to the normal screen unless the
warning is canceled, or the
button is pressed.
uuIndicatorsu
Message
*1
—
—
—
—
/
Continued
77