Table of Contents
Advertisement
4. A series of screens will follow confirming your requested map
transfer. Keep clicking OK to continue. The final screen will be a
screen displaying the progress of the map transfer process. Once
it is finished, MapFinder will return to the map screen and the maps
on the GPS unit or memory card will be ready to use.
If you don't have enough memory, you will receive an error
message. You can then deselect maps until the memory space
required matches the amount of available memory on your GPS
system or external memory card. You can also delete maps stored
in your GPS system or external memory card. Refer to section 7 for
details.
After you finish copying maps to an SD memory card, lock the
security lock to protect the maps from any damage. For that, follow
these steps.
A Remove the SD memory card from the GPS system SD/MMC
Card Slot.
B Lock the card security lock.
C Insert the SD memory card onto the GPS system SD/MMC
Card Slot.
Page
20
Advertisement
Table of Contents
