System Preferences - Royal Linea 1 Instruction Manual

Royal linea 1: instruction manual
Hide thumbs Also See for Linea 1:
Table of Contents

Advertisement

EURO CONVERSION
EURO
BEF
EURO
DEM
EURO
ESP
EURO
FRF
EURO
IEP
EURO
ITL
EURO
LUF
EURO
NLG
Follow the procedures used in Currency Conversion previously.
Note that Euro Conversion rates are set for the given currencies, therefore the Set Currency function does not apply to Euro
Conversion.
PC SYNCRONIZATION
To perform PC synchronization you must first connect the Linea to your PC. To connect the Linea to your PC, turn off your
computer and plug the supplied cable into the serial communication port on the PC.
Note: The Linea PDA requires a dedicated serial port. It cannot share a port with an internal modem, hand held or any other
device. If you are unsure about the exact location of the serial port on your computer, refer to the user's manual supplied
with the computer.
1.
Install the PDO Desktop software from the included CD ROM if you are going to use the Royal Desktop Personal
Information Manager. IF YOU ARE GOING TO SYNCHRONIZE YOUR RECORDS WITH MICROSOFT OUTLOOK, DO
NOT INSTALL PDO DESKTOP. INSTALL COMPANIONLINK INSTEAD. The installation routine should start
automatically when you insert the supplied CD into your PC. Simply follow the PC-screen prompts to install the correct PC
software package.
2.
After installation you will have two shortcuts on the PC Desktop. They are labeled PDO Desktop and SmartSync.
3.
SmartSync must now be configured to work with your PC. To configure SmartSync double click on the SmartSync desktop
shortcut. SmartSync will launch and appear in the lower right corner of the PC screen in the system tray.
4.
Right click on the SmartSync icon and select SmartSync Settings. Here you can select the appropriate Comport (COM1,
COM2, etc) for your PC. Select the correct port and Click on Apply and OK.
5.
SmartSync must appear in the system tray in order for the synchronization process to function. You will have to manually
start the SmartSync process unless you have selected the "Load SmartSync automatically when computer starts" option in
SmartSync Settings.
6.
Connect the provided cable between the PC Comport and the Linea. Make sure the cable fits snugly.
7.
On the Linea go to the Menu and scroll down to Syn. Icon. Click OK and then answer "Yes" to initiate the sync procedure.
8.
You will see the sync process start on the PC and "In Progress" will appear on the Linea. When successfully finished a
message will appear on the PC, "Sync OK" and on the Linea1 you will see "OK".

SYSTEM PREFERENCES

System Preferences define the general settings of Linea; these settings are:
Language – selects the prompt language.
Options are:
ENGLISH
ITALIANO
DEUTSCH
FRANCAIS
ESPAÑOL
PORTUGUÊS
DUTCH
LCD contrast – select the suitable contrast for easy viewing of the screen.
Date and Time formats – tap your desired format.
Key Tone – tap off to cancel the key click tones.
Auto Shut-off – select from 1,2,3,4 or 5 minutes.
13

Advertisement

Table of Contents
loading

Table of Contents