Advertisement
Advertisement
Table of Contents
Related Manuals for Roth Audio OLi3
Summary of Contents for Roth Audio OLi3
- Page 1 ENGLISH OLi Loudspeakers...
- Page 2 But, I and the team at Roth Audio believe that what we have here combines the very best use of technology, materials and design, to ultimately provide a loudspeaker which we can all be proud of.
- Page 3 ENGLISH OLi1 OLi2 OLi3...
-
Page 4: Loudspeaker Placement
Friedrich and treatment of the room.There will be more perceived bass when a speaker is Wilhelm moved closer to a wall boundry. In general, however, loudspeakers should be kept... -
Page 5: Connecting The Loudspeakers
Connecting the loudspeakers Before any connections are made, please ensure that all equipment in the system is turned off. Loudspeaker wire throughout the system should be good quality, loudspeaker grade audio cable with polarity coding. For loudspeaker wire that runs less than 25 feet, the cable should be a minimum of 18 AWG, for loudspeaker wire that runs up to 50 feet, the cable should be 16 AWG and for loudspeaker wire that runs longer than 50 feet, the cable should be at least 14 AWG. - Page 6 Listening Test To ensure that all connections have been made correctly, turn on your system and begin playback of material you are familiar with. Start off by listening at a low volume, then slowly raise the volume to a comfortable listening level. A proper stereo image should be present.
-
Page 7: Specifications
1” Polymer Integrated Soft Dome 315 (H) x 180 (W) x 218(D) mm 8 Ohms 90dB 45Hz~ 20KHz 150Watts Dual 5.25” Woven Fiberglass Hybrid Cones 1” Polymer Integrated Soft Dome 870 (H) x 205 (W) x 246 (D) mm ENGLISH OLi1 OLi2 OLi3... - Page 8 OLi Loudspeakers...
Need help?
Do you have a question about the OLi3 and is the answer not in the manual?
Questions and answers