Cooper Lighting Shaper 1200 Series Specification Sheet

D E S C R I P T I O N
The 1200 Direct/Indirect or Indirect High Performance Pendant
features a 2-1/2" H. Solid (S), Open (OB) or Frosted Glass (OBG)
center design with a double trim ring and is available in three
diameters with multiple mounting options.
S P E C I F I C AT I O N F E AT U R E S
M a te ri a l / M o u n t i n g
Solid (S) or Open (OB) painted
and plated cold rolled steel or
natural aluminum. Frosted Glass
Lense (OBG).
Tri-Pod (TP) 26" and 36" and
Quad-Pod (QP) 44" (Standard):
3/8" stem with a standard hang
height of 26" (OA) for the 26"
dia., 30" (OA) for the 36" dia. and
38" (OA) for the 44" dia.
Minimum overall hang height is
18" (OA) for the 26" dia., 24" (OA)
for the 36" dia., and 31" (OA) for
the 44" dia. Maximum overall
hang height is 8' (OA). Contact
factory for lengths above 8'.
Specify SCA for sloped ceilings
up to 0°-45°.
F i n i s h
Standard: Matte White (MW).
Premium: Natural Aluminum
(NA) [Sustainable Design] , Satin
Chrome (SC), Polished Chrome
(PC), Satin Brass (SB), Polished
Brass (PB), Oxidized Brass
(OBRS), Lacquered Satin
Aluminum (SAL), Satin Copper
(SCP), Polished Copper (PCP),
Satin Nickel (SN), Polished Nickel
(PN), Oxidized Copper (OCP),
Gun Metal (GNM), Lacquered
Satin Chrome (SCL), Lacquered
Satin Nickel (SNL) or Custom
Color (CC). Regressed solid edge
(between rings) will be satin
finish with all polished finishes.
Custom Decorative Metals:
(Specify a Color and Pattern)
Colors - Clear (CLR), Cabernet
(CBT), Sapphire (SPE), Sage
(SGE), Brass (BRS), Copper
(CPR), Black Pearl (BPL), Slate
Green (SGN), Champagne (CMP),
Chocolate (CLE), Indigo (IDO),
Royal Blue (RBE), or Pewter
(PWR). Patterns - Coral (COL),
Seashell (SHL) or Smooth (SMT).
Note: Select a standard or
premium finish for the stem(s)
and canopy. Example: SGE (Sage
color finish)-SMT (smooth
pattern) - SC (Satin Chrome)
stem (s) and canopy. Minimum
quantity is 5 of one color/pattern.
Contact the factory for lead time.
O p t i c s
Dedicated lamp optics with a
"kick reflector" formed out of
94% reflective specular anodized
aluminum.
B a l l a s t
Integral CFL electronic HPF ,
multi-volt 120/277V (347V
Canada), thermally protected
with end-of-life circuitry to
accommodate the specified lamp
wattage.
L a m p / S o cke t
26" - Three (3) or six (6) 27W
(2G11) high lumen CFL lamps.
36" - Three (3) or six (6) 27W,
39W, 40W, 50W or 55W (2G11)
high lumen CFL lamps.
44" - Four (4) or eight (8) 27W,
39W, 40W, 50W or 55W (2G11)
high lumen CFL lamps. CFL
socket injection molded plastic.
Lamps furnished by others.
I n s t a l l a t i o n
Installation requires 1/4-20 UNC-
2A All Thread rod. All Thread
(supplied by others) through a
standard J-box to an integral
support canopy support system.
The 1/4-20 UNC-2A All Thread
rod must be attached to the
building structure to support the
fixture's weight.
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
Catalog #
Project
Comments
Prepared by
O p t i o n s
Dimming Ballast - Except 27W,
contact factory for ballast
options (DM), Sloped Ceiling
Adaptor - Specify up to 45°
(SCA), Single Stem (1S - Solid
Only), Triple Stem (3S - Solid
only), Single Stem with Aircraft
Cable (1SAC), Aircraft Cable with
White SJ Cord (SJWAC), Aircraft
Cable with Clear SJ Cord
(SJCAC), Remote Emergency
Battery (REM) - contact factory,
Separate Switching (SSW),
Factory Fuse (FF), Damp Location
(DL): All Painted Finishes,
Lacquered Satin Chrome (SCL)
and Lacquered Satin Nickel (SNL)
finishes only. Contact factory for
Multi-bowl and alternative
mounting options.
L a b e l s
U.L. and C.U.L approved for
indoor and damp location. See
options for damp location
finishing requirements.
M o d i f i c a t i o n s
Shaper's skilled craftspeople
with their depth of experience
offer the designer the flexibility
to modify standard High
Performance Pendant luminaires
for project specific solutions.
Contact the factory regarding
scale options, unique finishes,
mounting, additional
materials/colors, or decorative
detailing.
shaperlighting.com
Type
Date
1200 SERIES
H i g h P e r f o r m a n c e
P e n d a n t L u m i n a i r e
I n d i r e c t o r I n d i r e c t / D i r e c t
F l a t P a n w i t h
D o u b l e R i n g Tr i m
New Custom
Decorative Metals Finish
HIGH PERFORMANCE
OPTICS
Shaper offers a line of products that
offer optically-engineered, high
performance optics for compact
fluorescent, metal halide and halogen
sources.
SUSTAINABLE
DESIGN
Shaper has a long-standing history
of offering environmentally-friendly
fixtures. The copper and bronze alloys
used in our exterior luminaires feature
up to 98% recycled content, contribute
less undesirable air emissions compared
to painted aluminum and are easy to
recycle.
Refer to the Icon Legend
Link on shaperlighting.com.
ADS051189
2008-09-08 13:25:49