Using The Laser - JUKI PS900SB13090CKZ Instruction Manual

5-6. Using the laser

5-6-1. Electric control port for the laser for the regular use
1. Electric control port for the laser irradiation: OUT4
2. Electric control port for downward-direction operation of the laser head: OUT6
5-6-2. Reduction in the laser cutting range in comparison with the sewing range of the standard
model of sewing machine
13090 : Reduction in the laser cutting range in the X direction : 210 mm
Reduction in the laser cutting range in the Y direction : 40 mm
5-6-3. Weight of the finished laser product
13090 : Weight of the finished laser product : 649 kg
5-6-4. Power consumption of the laser
13090 : Standard
Laser
❷
: 400 VA
: 1250 VA
❶
– 25 –
5-6-5. Operation pilot lamp
1) The laser irradiation is enabled only when sen-
sor lamp ❶ lights up. When the sensor lamp
goes out, the laser irradiation is disabled.
2) While laser operation pilot lamp ❷ located
above the head is in the ON state, the laser
receives the irradiation command. When it is
in the OFF state, the laser does not receive
the command. When the pilot lamp lights up,
the laser equipment is in the operation state or
in the stand-by state for irradiation.