Usb Operation; Program Mode; Other Features - Hyundai TRC 512 AU3B Instruction Manual

USB OPERATION

GENERAL OPERATION
PLAY / PAUSE 
SKIP +  &
SKIP - 
STOP 
PLAyBACK
1) Plug or slot in USB device to the port. (Make sure no disc on disc tray)
2) Set the "FUNCTION" selector to "CD / MP3" mode.
3) Press and hold the "PLAY / PAUSE" button for a few seconds to entry USB mode.
4) Playback will start automatically from the first track.
5) Press the "STOP" button when finished.
6) Press the "PLAY / PAUSE" button again, playback will start from the first track.
PROGRAM, MODE
The operation of PROGRAM, MODE are as the same as that of CD / MP3.
Please refer to CD / MP3 OPERATION.

OTHER FEATURES

ID-3 TAG (FOR MP3 ONLy)
1) Press the "INFO" button on unit.
2) ID3 information will show on display.
3) Press the "INFO" button agian to terminate.
AUTOMATIC STANDBy SwITCHING
To comply with the "ERP2 (Energy Related Products)" Ecodesign Directive (2009/125/EG), its
ultimate aim is to reduce the energy consumption of energy-using products; the device
automatically switches to standby after approx. 10 minutes without a signal. In order to use the
device again, switch the device off and then on again.
Press to start playing tracks from the USB.
Press again to stop playing USB operation temporarily.
Press again to resume playback.
Press to go to the next track or back to the previous track.
Press and hold while playing until you find the point of the sound.
Press to stop all USB operation.
EN - 36