Trou Bl E Shooting; General; About Bluetooth Device - Philips SB300B/00 User Manual

7 Trou bl e -
shooting
Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to
repair the system yourself.
If you encounter problems when using
this device, check the following points
before requesting service. If the problem
remains unsolved, go to the Philips Web
page (www.philips.com/support). When
you contact Philips, make sure that the
device is nearby and the model number
and serial number are available.

General

No power
•
Recharge your speaker.
No sound
•
Adjust volume on the connected
device.
•
In AUDIO IN mode, make sure that
music playback through Bluetooth
is stopped.
•
Make sure that your Bluetooth
device is within the effective
operational range.
Fail to turn on the speaker.
•
After the speaker is turned off, wait
for over 30 seconds and then turn
it on.
EN
9

About Bluetooth device

The audio quality is poor after
connection with a Bluetooth-enabled
device.
•
The Bluetooth reception is poor.
Move the device closer to this
product or remove any obstacle
between them.
Cannot connect with the device.
•
The Bluetooth function of the
device is not enabled. Refer to the
user manual of the device for how
to enable the function.
•
This product is already connected
with another Bluetooth-enabled
device. Disconnect that device and
then try again.
•
This product is not in pairing mode.
Press and hold
to enter pairing mode, and then try
again.
The paired device connects and
disconnects constantly.
•
The Bluetooth reception is poor.
Move the device closer to this
product or remove any obstacle
between them.
•
For some devices, Bluetooth
connection may be deactivated
automatically as a power-saving
feature. This does not indicate any
malfunction of this product.
for three seconds