Nokia TA-1097 User Manual page 8

Hide thumbs Also See for TA-1097:
Table of Contents

Advertisement

Nokia 7.1 User Guide
and slide the tray out.
2.
If you have a single-SIM phone, put a nano-SIM card in slot 1 and a memory card
in slot 2 on the tray with the contact areas face down. If you have a dual-SIM
phone, put a nano-SIM card in slot 1 and either a second SIM or a memory card in
slot 2 with the contact areas face down ¹.
3.
Slide the tray back in the slot.
Use only compatible memory cards approved for use with this device.
Incompatible cards may damage the card and the device and corrupt data stored
on the card.
Note: If you have a dual SIM variant with only one SIM tray, you cannot use two SIM cards
and a memory card at the same time.
REMOVE SIM AND MEMORY CARD
1.
Open the SIM and memory card tray: push the tray opener pin in the tray hole
and slide the tray out.
2.
Remove the cards.
3.
Slide the tray back in the slot.
Important: Do not remove the memory card when an app is using it. Doing so may damage
the memory card and the device and corrupt data stored on the card.
¹
Use only original nano-SIM cards. Use of incompatible SIM cards may damage the card or the device, and may corrupt data
stored on the card.
© 2018 HMD Global Oy. All rights reserved.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

7.1Ta-1095Ta-1100Ta-1085Ta-1096

Table of Contents