Table of Contents
Advertisement
AUTO DOOR LOCKS
Program how and when the vehicle doors automatically lock and unlock.
Door Locks
D e f a u l t L o c k S e t t i n g
The doors are preset to lock when
your vehicle reaches about 10 mph.
Programming the Auto Door Unlock Setting
Follow the below steps to program all doors to unlock when you shift to Park. See your
Owner's Manual for other setting options.
1. Close the driver's door. Shift into
Park.
2. Turn the ignition switch to ON (II).
Note: The driver's and front passenger's doors can be opened by pulling the inner front door
handle, regardless of the setting. Changing the setting to "All Doors" is useful for unlocking the
rear doors when either inner front door handle is pulled.
6
D e f a u l t U n l o c k S e t t i n g
Only the driver's door is preset to
unlock when you shift into Park (P).
3. Press and hold the unlock side of the
master lock switch for about 10
seconds. In that time, you will hear
three clicks.
4. Within 5 seconds, turn the ignition
switch to LOCK (0).
FUEL FILL DOOR
Easy-to-use locking fuel door keeps your fuel cap secure.
Opening the Fuel Fill Door
When you unlock the driver's door,
the fuel door unlocks.
To open, push and release the fuel
door in the area shown until it
pops open.
Closing the Fuel Fill Door
Push the fuel door until it is flush
with the body.
When you lock the driver's door,
the fuel door locks.
Note: If you lock the doors while the
fuel door is open, you must unlock the
doors to close the fuel door.
7
Advertisement
Table of Contents
