Advertisement
Installation and aftercare instructions:
Before you start it is recommended that the mirror is secured to a suitably reinforced wall to ensure stability. Wall plugs
are only suitable for solid stone/brick walls. For plasterboard walls use specialist wall plugs (not supplied).
Wear suitable eye protection when drilling. Take care when using power tools near water -the use of a residual current
device (RCD) is recommended. Beware of hidden pipes or cables. Take care when drilling tiled surfaces as the drill might
slip. Use a piece of masking tape to prevent the drill from wandering.
400MM
700MM
Unit 2 Bluebell Industrial Estate, Dublin 12
Tel: 01 450 4307 Email: sales@rtlarge.ie
MRTL249 SYDNEY 2
(DL-03D)
Features:
High density LED technology
Touch sensor switch
SQ Class ultra-clear flat glass surface
Copper free silver mirror with Valspar Anti-Oxidation coating
LED lifespan over 100,000 hours
Compliant with CE, EMC, LVD, IP44, RoHS
132.5MM
124MM
www.rtlarge.ie
135MM
Advertisement
Table of Contents
Related Manuals for RT LARGE SYDNEY 2 MRTL249
Summary of Contents for RT LARGE SYDNEY 2 MRTL249
- Page 1 MRTL249 SYDNEY 2 (DL-03D) Features: High density LED technology Touch sensor switch SQ Class ultra-clear flat glass surface Copper free silver mirror with Valspar Anti-Oxidation coating LED lifespan over 100,000 hours Compliant with CE, EMC, LVD, IP44, RoHS 132.5MM 135MM 400MM 124MM 700MM...
- Page 2 Installation Procedure IMPORTANT: ALLWAYS SWITCH OFF THE ELECTRICAL SUPPLY AT THE MAINS DURING INSTALLATION AND MAINTENANCE. 1. Before installation. Decide on a desired location for the mirror. Be mindful of hidden water pipes or electrical cables behind the wall. It is recommended that infrared sensor (if applied) is kept a minimum distance of 150mm from the adjacent wall.
- Page 3 Operating Instructions Lighting is turned on/off using the touch sensor switch on the lower centre of the mirror surface, to operate, cover the touch zone in the circle with your finger, please note full cover of the circle is required, the sensor only reacts to a finger touch, finger nails will not work.
Need help?
Do you have a question about the SYDNEY 2 MRTL249 and is the answer not in the manual?
Questions and answers