Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Hubble HV-204
- Page 1 V 1.0 cabinet assembly manual...
-
Page 2: Table Of Contents
index Assembling the Top panel, Bottom panel and Frame Installing the Caster on the BOTTOM panel and the Cover Board on the Cable Entry on the TOP panel Installing the Fan Tray under the TOP panel Installing the Mounting Angle Installing the Mounting Profile Installing the Fixed Shelf and Cover Board on the BOTTOM panel... -
Page 3: Assembling The Top Panel, Bottom Panel And Frame
Assembling the Top panel, Bottom panel and Frame 1. Align the Top Panel and Bottom Panel with the Frame. Bottom Panel Frame Top Panel 2. Using the Hex Socket set screws M8x12 to attach them. M8 Flange Nut M8 Allen Screw... -
Page 4: Installing The Caster On The Bottom Panel And The
Installing the Caster on the BOTTOM panel and the Cover Board on the Cable Entry on the TOP panel 1. Use the tapping screws M5x10 to attach the Caster to the Bottom Panel. M5x10 Pan Head Tapping Screws 2. Use the tapping screws M4x8 to attach the Cover Board on the Cable Entry on the Top Panel. -
Page 5: Installing The Fan Tray Under The Top Panel
Installing the Fan Tray under the TOP panel 1. Use the tapping screws M5x10 to attach the Fan Tray under the Top Panel. Fan Tray M5x10 Pan Head Tapping Screws... -
Page 6: Installing The Mounting Angle
Installing the Mounting Angle 1. Install the Bayonet-type nut M6 on the Frame and then use the Allen screw M6x10 to connect the Mounting Angle and Frame tightly. Note: 4 pcs mounting angle (below 32U) 6 pcs mounting angle (above 32U) Mounting Angle Frame... -
Page 7: Installing The Mounting Profile
Installing the Mounting Profile 1. Install the Bayonet-type nut M6 on the Mounting Angle and then use the Allen screw M6x10 to connect the Mounting Profile and Mounting Angle. Mounting Profile... -
Page 8: Installing The Fixed Shelf And Cover Board On The Bottom Panel
Installing the Fixed Shelf and Cover Board on the BOTTOM panel 1. Install the Bayonet-type nut M6 on the Fixed Shelf Mounting Profile and then use the Allen screw M6x10 to connect the Fixed Shelf and Mounting Profile. Fixed Shelf 2. -
Page 9: Installing The Back Door And Front Door
Installing the Back Door and Front Door 1. Install the Rotational Pin for the Back Rotational Door on the Bottom Side and then insert the Down Bolt to aim at the Hole on the Top Panel. Rotational 2. Repeat the steps for the Front Door. -
Page 10: Installing The Side Panels
Installing the Side Panels 1. Insert the Clips in the middle of the Side Panels using two hands, and then push the Side Panels into the Frame. Note: The Clips must be in line with the Clip-holes of the Frame. Side Panel... -
Page 11: Installing The Adjustable Feet On The Bottom Panel
Installing the Adjustable Feet on the BOTTOm panel 1. On the Bottom Panel of the Cabinet, install Adjustable Feet with a wrench. CONGRATULATIONS! Once all the above steps have been completed your High Voltage Cabinet will be ready to use! If you have any difficulties with setting up your Cabinet, please contact our Technical Support Department via support@hubblelithium.co.za.
Need help?
Do you have a question about the HV-204 and is the answer not in the manual?
Questions and answers