LEXGO Spark User Manual

What's in the Box?

1. Charging Port
2. Power Button
3. Charger
Please fully charge the battery prior to use.
Specs & Features
Max Speed: Up to 16 KPH
Max Range: Up to 13 KM
Battery: 36V, 2.0Ah Lithium-Ion
Motor: 400W, Dual Hub Motor
Climbing Angle: Up to 15°
Product Weight: 7.26 KG
Tire Size: 6.5" All-Terrain Tires
Product Dimensions: 597 x 185 x 178 mm
Charger: UL LISTED 100-240V
Charge Time: Up to 5 Hours
Recommended Age: 12+
Weight Limit: 90 KG

1. Get Started

1.1 Charging the Battery

Only use the included charger.
Plug the charger into the wall before plugging it
into the charging port.
Don't turn on the SPARK while it is charging.
Charge the battery until it is fully charged - up to
5 hours.

1.2 Indicator Lights

Status Light: If these lights turn red, or if you are
having issues with the SPARK, you may need to
recalibrate it.
Warning: The SPARK will automatically tilt up and
slow down once the battery power goes below
10% as a safety precaution.

1.3 How to Recalibrate

Follow these 3 steps:
1. Place the SPARK on a flat, level surface and
hold it still.
2. Hold the Power button until notified of a
successful calibration (about 5 seconds).
3. Restart the SPARK by turning it off and then on.
Adults must assist children in the initial
adjustment procedures of the product.

2. Make Moves

2.1 Riding the SPARK

NEUTRAL
TURN LEFT
TURN RIGHT

2.2 Turning the Lights on

The default lighting mode will display when the
SPARK is powered on.
Briefly press the power button to switch
between different lighting effects.
Waste Electrical and Electronic Equipment (WEEE) Directive.
"All products marked with this symbol are electrical and electronic equipment
waste (WEEE according to Directive 2012/19/EU) that should not be disposed of
together with unsorted household waste. On the contrary, you should protect the
environment and human health by delivering the waste to a collection point
authorized for recycling of electrical and electronic equipment waste, arranged by
the public administration or local authorities. Proper disposal and recycling help
prevent potentially negative consequences for the environment and human
health. Contact the municipality or local authorities for more information on the
location and terms and conditions of such collection points."
Directive on the Restriction of the Use of Hazardous Substances (RoHS)
This product from LEXGO technology It, and the included parts (cables, wires,
etc.) comply with the requirements of the Directive 2011/65/EU on the Restriction
of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment ("Revised RoHS" or 'RoHS 2").
Declaration of Compliance for the European Union
Battery recycling information for the European Union
Batteries or their packaging are labeled in accordance with European Directive
2006/66/EC on batteries and accumulators and waste batteries and
accumulators. The directive establishes the framework for the return and
recycling of spent batteries and accumulators applicable throughout the
European Union. This label applies to various batteries to indicate that the battery
should not be thrown away, but rather recovered at the end of its useful life as per
the instructions in this directive.
In accordance with European Directive 2006/66/EC, batteries and accumulators
are labeled to indicate that they should be collected separately and recycled at
the end of their useful life.
The label on the battery may also include a chemical symbol for the metal used in
the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Battery and
accumulator users should not dispose of batteries and accumulators as unsorted
waste, but use the collection framework available to customers for return,
recycling, and treatment of batteries and accumulators. Customer participation is
important to minimize the potential effects of batteries and accumulators on the
environment and human health due to the potential presence of hazardous
substances.
Before disposing of electrical and electronic equipment (AEE) through garbage
collection or at waste collection facilities, the end user of equipment containing
batteries and/or accumulators must remove said batteries and accumulators for
separate collection.