gefran GV-PLUG-232 Manual

GV_PLUG-232
Description
The communication module is an interface designed to let the operator pan-
el connect to the RS-232 signals. The communication will be through the
dedicated DB9 female connector. The technical data is listed in the table
below:
Communication protocol
Optical insulation
Pin Description
1 GND
2
3 TX
4 RX
5
6 +5V 100mA max.
7 CTS
8 RTA
9
1
MANPLUG232001 V.1.00 07.21
Mounting the module
Remove the connector protective cover from the equipment before installing
the module.
WARNING: Do not separate when energized.
3
MANPLUG232001 V.1.00 07.21
RS-232
No
Dimensions
2
MANPLUG232001 V.1.00 07.21
The products have been designed for use on Gefran products with expan-
sion slot for plugin module for use in an industrial environment in compli-
ance with the 2014/30/EU directive
The products have been designed in compliance with:
EN 61000-6-4
EN 61000-6-2
The installation of these devices into the residential, commercial and light-
industrial environments is allowed only in the case that special measures
are taken in order to get the conformity to IEC 61000-6-3.
This device cannot be disposed of as a domestic waste
but according to WEEE European Directive 2012/19/EU
Reproduction of the contents of this copyrighted document, in whole or
part, without written permission of Gefran Soluzioni srl, is prohibited.
MANPLUG232001
V.1.00 15.07.2021
Gefran Soluzioni srl - Provaglio d'Iseo BS, Italy
4
EN 55011 Class A
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
Copyright © 2021 Gefran Soluzioni srl
www.gefran.com