Table of Contents
Advertisement
Installation
Connecting to a non-threaded water tap
C
22
English
Untitled-24 22
1. Remove the adaptor (A) from the water hose (B).
A
B
2. Use a Phillips screwdriver to loosen four screws on
the adaptor.
3. Hold the adaptor and turn part (C) in the arrow
direction to loosen it by 5 mm (*).
4. Insert the adaptor onto the water tap, and then
tighten the screws while lifting the adaptor.
5. Turn part (C) in the arrow direction to tighten it.
C
2021-02-16
3:35:36
Advertisement
Table of Contents
