Advertisement
Overview
③
①
②
1
Touch Area
2
Microphone
3
Indicator Light
4
Indicator Light
5
Charging Case
Power on / off
The earbuds will instantly power on when removed from
the charging case.
The earbuds will turn off and automatically start recharging
when returned to the charging case.
The earbuds instantly power up when the charging case is
opened. Bluetooth connection is established when earbuds
are removed from the case. The TWS500 will then enter
pairing mode, as indicated by a flashing white light. The
earbuds will automatically power down if connection is not
established in three minutes.
(Note: When powered and not connected to a Bluetooth
source but noise control is activated, the TWS500 will
remain in the noise cancellation mode for 3 minutes before
timing out. The LED light will turn off, and the earphone will
power off when the battery is low.)
To power up the earbuds when out of the case, press and
hold the earbud (L) and earbud (R) for 3 seconds, after
which the earbuds will be power on as indicated by a
prompt sound of "power on" and flashing white LED light.
③
①
④
⑤
②
1
Advertisement
