IndeeLift FTS-600 User Manual

Floor-to-stand
Hide thumbs Also See for FTS-600:

Advertisement

Quick Links

FTS-600
(Floor-to-Stand)
USER'S MANUAL
INDEELIFT, INC.
5143 Tesla Road Livermore, CA 94550
USA
844-700-5438
www.indeelift.com

Advertisement

Table of Contents
loading

Summary of Contents for IndeeLift FTS-600

  • Page 1 FTS-600 (Floor-to-Stand) USER’S MANUAL INDEELIFT, INC. 5143 Tesla Road Livermore, CA 94550 844-700-5438 www.indeelift.com...
  • Page 2: Table Of Contents

    Contents Safety Symbols ..............................3 Introduction: ................................ 3 Overview: ................................4 FTS-600 Component Identification: ........................ 6 Preparing the FTS-600 for Use: ........................8 Unpacking the FTS-600: ........................8 Charging System: .............................. 8 Operation: ................................9 Functional Overview ........................... 10 General FTS Operation: ........................10 Securement Belt Information:.........................
  • Page 3: Safety Symbols

    The FTS-600 is also engineered to lift a patient standing on the platform of the FTS-600 from the floor to a height that will allow the patient to easily get onto an exam or radiology table or bed.
  • Page 4: Overview

    FTS-600 UM 7.2023 Overview: This manual covers the FTS-600 professional model which is designed for use in acute and post- acute care environments. The FTS-600 will be referred to as the FTS in this manual. The FTS is operated with a wired remote control in a portable “roll-around” configuration. This state-...
  • Page 5 LIFTED ABOVE A SAFE HEIGHT OF 14 INCHES FROM THE FLOOR! A caution label is on the back of the IndeeLift indicating the 14-inch maximum platform height when standing on the unit. When the care provider raises the platform up, the top of the...
  • Page 6: Fts-600 Component Identification

    40 seconds. The wired remote has graphics indicating the up and down functionality. The wired remote is generally stored on either of the FTS’s rise-assist handles. The FTS will only operate when the lever is depressed. Page 6 of 20 Copyright 2023 IndeeLift Inc. All Rights Reserved...
  • Page 7 The FTS Identification label is located on the back side of the FTS column and includes the model number, serial number and patent numbers. The IndeeLift HFL and FTS products are covered by one or more patents, including U.S. Patent Nos. 9,808,388 B2 & 10,835,434 Page 7 of 20 Copyright 2023 IndeeLift Inc.
  • Page 8: Preparing The Fts-600 For Use

    LED indicator showing the charge level (Figure 2). The user manual for the batteries and charger is included with the FTS. Figure 2 Page 8 of 20 Copyright 2023 IndeeLift Inc. All Rights Reserved...
  • Page 9: Operation

    NOTICE Ensure that all users are thoroughly familiar with the correct operation of the FTS-600 before they use it to lift someone. Moving the FTS-600 Any able-bodied staff or care provider can move the FTS around the care environment. The person moving the FTS s tands behind the lift and places one foot on the stainless-steel foot pad at the rear of the unit and then gently tilts the FTS rearward by pulling the handles toward them.
  • Page 10: Functional Overview

    FTS so that the platform is facing the patient’s lower legs and the rear edge of the platform is as close to the patient’s buttocks as possible. c. The care provider gently assists the patient to tilt-up onto the platform while the patient Page 10 of 20 Copyright 2023 IndeeLift Inc. All Rights Reserved...
  • Page 11 Figure B depicts a patient being assisted onto the device from a side lying position. Figure B Figure C Depicts a patient being raised to a seated height. Figure C Figure D Depicts a patient raised to standing height. Figure D Page 11 of 20 Copyright 2023 IndeeLift Inc. All Rights Reserved...
  • Page 12 Once the lift is complete, using the wired remote, position the FTS platform to the floor or a normal seated height based on its intended use and return the FTS to its storage location. Page 12 of 20 Copyright 2023 IndeeLift Inc. All Rights Reserved...
  • Page 13 Once the lift is complete, using the wired remote, position the FTS platform down to the floor or a normal seated height based on its intended use and return the FTS to its storage location. Page 13 of 20 Copyright 2023 IndeeLift Inc. All Rights Reserved...
  • Page 14 Before returning the FTS to its stored location, remember to either swing the rise assist handle back into position or, if you removed the handle, replace it on the appropriate side. Page 14 of 20 Copyright 2023 IndeeLift Inc. All Rights Reserved...
  • Page 15: Securement Belt Information

    All procedures that do not involve the use of the waist and chest belt accessories are covered in detail earlier in this Users’ Manual and are fully applicable to the FTS-600 units. Using the Belt Assemblies Each belt assembly includes two straps;...
  • Page 16: Maintenance

    FTS using the two belt assemblies cannot fall off the FTS’s seat! Maintenance: The IndeeLift FTS requires no regular maintenance. All exposed surfaces can be cleaned with standard cleaning products and a soft cloth. The FTS is rated for water exposure and is able to be washed with a pressure washer if contaminated.
  • Page 17: Troubleshooting / Service

    FTS-600 UM 7.2023 Troubleshooting / Service: The FTS-600 was designed to provide years of trouble-free performance. There are no user serviceable parts. However, should you encounter a situation where the unit is not operating properly, please ensure you have correctly followed the procedures for recharging the unit (covered in the Charging the Battery section of this manual on Page 8).
  • Page 18: Warranty Information

    FTS-600 UM 7.2023 Warranty Information: IndeeLift Inc. warrants to the original purchaser that this product and the components thereof will be free from defects in workmanship and materials for a period of one year from the original date of purchase. IndeeLift Inc. will, without charge, repair or replace at its option, any defective components or the whole product if necessary.
  • Page 19: Physical Specifications

    Standard 2-prong 220V AC Power 9’ (2.74m) cord (Rest of World) Operating environment: 41° to 104°F (+5˚C to 40˚C) Battery and System: 24V Lithium-ion Battery Pack……...…. Standard “Smart” Charger…….…………...… Standard Page 19 of 20 Copyright 2023 IndeeLift Inc. All Rights Reserved...
  • Page 20 FTS-600 User Manual For more sales and technical information refer to: www.IndeeLift.com Page 20 of 20 Copyright 2023 IndeeLift Inc. All Rights Reserved...

Table of Contents