Page 1
Know your Miro humidifier MH7000 User Manual...
Page 2
Video Guide Read the QR code using your Click the link that pops up mobile phone. when you scan the QR code. Link Scan the QR code below and watch a quick how-to video.
Page 3
Thank you for choosing Miro. We are glad to see you here. Please read the user manual thoroughly before using the Miro humidifier. Please carefully read, understand, and follow all warnings and instructions. The warranty information can be found in this user manual.
Mist output setting Remote Controller Low water-level indicator Child-lock on/off Main Unit Assembly Timer Assembling Miro Humidifier Silent mode on/off Filling up the Stainless Steel Water Bowl Changing Brightness & Color Placing the Stainless Steel Water Bowl UV Indicator Floating the Main Unit...
Page 5
How to Clean Your Humidifier Cleaning the Main Unit Cleaning the UV Mist-maker engine Frequently Asked Questions Please Read Before Use For Your Safety Product Specifications Warranty Disclaimer Miro Customer Service (support.mirohome.com)
In The Box Please make sure all modules are in the box. Contact support@mirohome.com if any module is missing. Humidifier Case Stainless Steel Main Unit Outer Vapor Cap Water Bowl Touch Station Water Bowl Cover UV Mist-maker Directional Cap engine User Manual Remote Controller...
Humidifier Modules Miro Humidifier Directional Cap Outer Vapor Cap Water Bowl Cover Main Unit (Please see page 8 for details) Stainless Steel Water Bowl Humidifier Case Touch Station...
Main Unit Assembly Align the UV Mist-maker engine with Inner Funnel. See Diagram 1-1 for details. Align the Mist-maker fan inserts to the holes on the Inner Funnel. Push it in. See Diagram 1-1 for details. Push in the Outer Funnel as shown in the Diagram 1-2. Mist-maker fan Mist-maker fan inserts UV Mist-maker engine...
Assembling Miro Humidifier 01. Filling up the Stainless Steel Water Bowl Fill the water up to the bottom MAX line. The top MAX line indicates the maximum amount of water when the Main Unit is floating. Warning Please clean your Stainless Steel Water Bowl using a mild dish detergent before using your humidifier for the first time.
02. Placing the Stainless Steel Water Bowl Place your Touch Station on a flat surface. Use the guide to properly place your Stainless Steel Water Bowl. Stainless Steel Water Bowl Warning Please be careful when handling the Stainless Steel Water Bowl. Do not spill water on the Touch Station.
04. Inserting Cable Holder Align the Cable Holder to Stainless Steel Water Bowl and connect it in place. Cable Holder 05. Installing Humidifier Case Align the Humidifier Case to Stainless Steel Water Bowl and place it down. Humidifier Case Stainless Steel Water Bowl...
06. Placing the Water Bowl Cover Place the Water Bowl Cover Water Bowl on top of the Humidifier Case. Cover Warning Please do not overfill the Stainless Steel Water Bowl. Humidifier may not work Humidifier if you overfill the water bowl. Case 07.
08. Placing Directional Caps (Directional/Straight) Place the cap of your choosing on top of the Outer Vapor Cap. Directional Straight The Directional Cap will shoot the mist at a slight angle while the Straight Cap will shoot the mist straight up. You can turn the Directional Cap to desired direction.
10. Connecting the Power Cable Please connect the DC Adapter to the Touch Station. Warning Please connect the Magnetic Connector to the Touch Station before connecting the DC Adapter to a power source. Warning Never pull the wire when disconnecting. Disconnect by lightly holding the base of the DC Adapter and gently pulling it out.
Page 17
2ft or more Maintain at least 8ft away from the Miro Air Purifier The sensor from Miro Air Purifier will detect the vapor particles from the humidifier. This may cause the air purifier to perform at its highest output. Please set the Air Purifier power level to one if humidifier has to be used nearby.
Page 18
Water level sensor We use Stainless Steel Water Bowl to maximize UV disinfecting feature. You may feel a slight electric current. This is not harmful to humans. Surface condensation There may be slight condensation inside the UV light glass due to difference in temperatures.
How to Use the Touch Station Powering on/off Tap the power icon to turn the humidifier on and off. When you turn on the humidifier, the output level will be on 'automatic' mode, On/Off light color will be 'warm white', and light brightness will be set to level 3 brightness.
Mist output setting You can adjust the mist output level to automatic. You can also set it to a specific output level from 1 to 3 by pressing the 'output level' icon Mist Output Setting (Automatic, Level 1, Level 2, Level 3, OFF). Output Level Automatic Level 1...
Page 21
Automatic Mode ( A ) Automatic mode will use the humidity sensor in your humidifier to determine the output settings. The humidifier will automatically try to achieve the optimal humidity level of 40 ~ 60%. Output Level Humidity Level 60%< Level 1 40~60% Level 2...
Use the miroT to enable your humidifier's smart features. Long press You can use the Miro Smart Home mobile application to (2 seconds) change settings even if the child-lock function is enabled. Use the child-lock feature to ensure that your humidifier runs without any interruption.
Changing Brightness & Color Set the light brightness by pressing the button shown in the Diagram (Level 3 - Level 2 - Level 1 - OFF) Light Control Button UV Indicator The UV disinfecting process will begin once the UV indicator light is on. This will disinfect the water to ensure UV Indicator that the mist is clean.
Smart Humidifier (miroT) sold separately Turn your humidifier into a smart appliance by connecting miroT. Your humidifier can connect to Miro Smart Home app, Alexa, Google Home, and other platforms once miroT is installed. 01. Installing miroT Get your miroT ready Find a slot on the side of the touch station as shown in the Diagram C1-1.
Page 27
02. miroT Installation & User Guide Scan the QR code to get to miroT User Guide. Warning Make sure to place your smart appliance where you have strong Wi-Fi signal. miroT User Guide miroT can be purchased on shop.mirohome.com. Please check the compatibility before purchasing.
How to Clean Your Humidifier Every module that touches water can be cleaned easily and thoroughly. Modules that can be cleaned Please make sure to disconnect your humidifier from power before cleaning. Use soft dish sponge and mild dish soap to clean the modules. Humidifier Case Stainless Steel Water Bowl...
Page 29
Do NOT wash these modules MUST READ Touch Station, DC Adapter, and the Magnetic Connector (connected to the Mist- maker engine) must stay out of water. These modules are not waterproof. Keep them dry at all times. Touch Station DC Adapter Magnetic Connector (UV Mist-maker engine) Please read before cleaning!
01. Cleaning the Main Unit Pull the Outer Funnel up to dissemble your Main Unit. Outer Pull the UV Mist-maker engine/fan Funnel out to further dissemble the Main Unit. Warning Please keep the Magnetic Connector dry when cleaning the Mist-maker engine/fan. Warning Use a gentle dish sponge and mild dish Inner...
02. Cleaning the UV Mist-maker engine Use the Magnetic Connector Cap to cover the Magnetic Connector before cleaning the Mist-maker engine/fan. Warning Your Mist-maker may malfunction if the Magnetic Connector gets wet. Magnetic Magnetic Connector Cap Connector Warning Please handle the Mist-maker engine/fan gently. Do not put too much pressure in the engine.
Page 32
Deep cleaning your Main Unit Cleaning Floating Base Dissemble your Main Unit and use mild dish soap and soft sponge to clean. Make sure there's no water inside the Floating Base during reassembly. Warning Water in the Floating Base may cause your humidifier to malfunction.
Page 33
Deep cleaning your Main Unit Cleaning the Inner Funnel Weight Pull out the weight from the Inner Funnel. Clean it using mild dish soap and soft sponge. Make sure to dry everything before reassembly. Warning Your mist output will decrease without the weight.
Page 34
Deep cleaning your Main Unit Cleaning the Inner Funnel Silicone Lining & Silicone Gently take apart the silicone of the Inner Funnel to clean it with dish soap and sponge. Make sure to re-assemble it. Warning Inner Funnel Silicone Lining The Main Unit will malfunction without the silicone lining.
Frequently Asked Questions (FAQs) Please find the frequently asked questions below. If you continue to have issues with the humidifier, please create a problem ticket on support.mirohome.com or send us an email at support@mirohome.com. Issue Check First Possible Solution Humidifier does not work. 1) Is the DC Adapter 1) Please connect the DC connected to a power source?
Page 36
Issue Check First Possible Solution My humidifier will not Is the water too hot? Please use lukewarm water make any mists. for maximum performance. Is the water level too low? Please refill the Water Bowl. The humidifier will stop running when there is about an inch level of water left.
Page 37
Miro recommends using the humidifier in an enclosed space. What type of water You can use any type can I use? of water. Miro recommends using distilled or purified water for maximum performance.
Page 38
Is there limited ventilation The continuous output whenever I use in your room and completely and increase in humidity in the Miro humidifier. closed off? a completely closed off space will make the air look foggy. Please reduce the output level and ventilate your space.
Page 39
Not only is it more difficult to clean using those chemical solution, it may also degrade your humidifier over time. We designed all Miro humidifiers so that you can easily clean them with only dish soap and sponge. Can I use essential oils? Please do not use essential oils with Miro humidifiers.
Page 40
Issue Check First Possible Solution There's some discoloration. Discoloration will occur due to the UV light. This is natural and is not covered by warranty. LED lights on the Touch Check page 22 to see Child-lock function will Station does not work. if the child-lock function is disable the Touch Station.
· Make sure your Stainless Steel Water Bowl is dry when the humidifier is not in use. Tips & Recommendations · Miro recommends using the humidifier away from any other electrical appliances or any products sensitive to humidity. · Always make sure to clean your humidifier and place your humidifier on a flat surface.
Page 42
· Please do not pull the wire. · Miro recommends using distilled or purified water. Hard water contains minerals that may shorten the lifespan of your humidifier. · Please make sure your humidifier is disconnected from electricity when refilling or washing your humidifier.
Product Specifications Model Name MH7000 Manufacturer Miro Corp. Humidification Method Ultrasonic Color White Water Tank Size 4.8 L (1.27 gal.) Item Weight 3.4 kg / 7.50 lbs. 253 x 265 x 790 mm (10 x 10.4 x 31 inch) Item Size Shipping Box Size 330 x 330 x 570 mm (13 x 13 x 22.5 inch)
Miro warrants that for a period of one year from shipment, the Product will be free from defects in materials and workmanship under normal use in ccordance with the documentation provided with the Product.
Page 45
All implied warranties of merchantability or fitness for a particular purpose are limited to the duration of this warranty except for the limited express warranties set forth above, Miro America Inc. disclaims all other express or implied warranties or conditions.
Page 46
4. Refund to the buyer the original purchase price less that amount directly attributable to use by the buyer prior to the discovery of the nonconformity. Product Registration We recommend that the buyer fill out and register the warranty here: https://geni.us/HpJ0 Miro America Inc.
Miro Customer Service Miro operates in-house customer support site. Please visit support.mirohome.com or email us at support@mirohome.com if you have any issues with your Miro product. Contact at support@mirohome.com You should expect a response from us within 24 hours during business hours.
Need help?
Do you have a question about the MH7000 and is the answer not in the manual?
Questions and answers