Advertisement
▪ Please ensure the proper attire is worn when operating this device.
▪ Please be sure to check the worktable before use-if there's any loose
screws, or if there is a shift of motor back cover.
▪ Please make sure you install a leakage protection device, this must be
connected with the earth wire.
▪ Gloves must be worn when replacing the Saw Band.
▪ Never Position fingers or thumbs in line with the blade to avoid serious
personal injury.
▪ DO NOT BACK MEAT AWAY from the blade while the saw is running. Plan
your cuts so you always cut through the meat. If you need to back the
meat out, turn the bandsaw off and wait for the blade to come to a
complete stop.
▪ Do not twist or put excessive stress on the blade while backing meat
away
▪ Do not operate the emergency stop frequently, this can cause damage
to the motor.
WARNING
SAFETY INSTRUCTIONS
2
Advertisement
