Changing The Rack-Mount Hardware (Ro-7000) - Roland VM-7100 Owner's Manual

V-mixing processor

Hide thumbs Also See for VM-7100:

Table of Contents

Changing the Rack-mount Hardware (RO-7000)

The VM-7000 series comes with pre-installed rack-mount brackets that allow the

unit to be mounted in a system rack. As a separately sold option, a different set of

rack-mount brackets — the RO-7000 — is available for purchase. When the RO-7000

is installed, the VM-7000 series will be positioned slightly backward (away from

yourself) in the rack. This way, cable connectors that are plugged into the front panel

jacks will not be in the way.

1 Turn off the power on all equipment, and disconnect all cables from the

VM-7000 series unit.

2 Remove only the screws shown in the following diagram, and detach the

rack-mount brackets that came with your VM-7000 series unit.

fig.3-10

3 Using the (specified) screws that you removed in step 2, attach the

RO-7000.

fig.3-11

4 This completes installation of the RO-7000.

Installing Optional Devices

There are two ways to

attach the RO-7000. Use the

method suitable for your

needs.

Table of Contents

Vm-7200