Bebeconfort KX-802B - Bottle Warmer Manual

Table of Contents

Contents

1 Technical Information
2 Description of the Device
3 IMPORTANT RECOMMENDATIONS
4 Heating Baby Feeding Bottles and Jars
5 Cleaning your Device
6 Disposal
7 Documents / Resources
- 7.1 Download manual

Technical Information

ELECTRICAL RATING
Model: KX-802B
Input voltage: 220-240VAC 50-60Hz
Wattage: 500W

Description of the Device

Steam ring
Measuring cup
Main Body
Press knob

4.1. Light

Base

IMPORTANT RECOMMENDATIONS

This appliance can be used by children aged from 3 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and above and supervised. Keep the appliance and its cord out of reach of children aged less than 3 years.
Appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
The power cable cannot be replaced. If the cable becomes damaged, the appliance should be scrapped.
Always unplug the appliance before cleaning or filling it.
Do not use the appliance in humid conditions or directly immerse it in water.
Only press the button once the appliance has been plugged in.
Never operate the appliance without water.

OTHER IMPORTANT RECOMMENDATIONS

This product should only be used to heat up your baby's meals.
Do not warm baby food for too long.
The appliance is securely designed so that only specialists are able to take it apart for repairs. If the appliance stops working, please contact the after-sales department.
Do not use the appliance outdoors.

This appliance is intended to be used in household and similar applications such as:

Staff kitchen areas in shops, offices and other working environments;
By clients in hotels, motels and other residential type environments;
Farm houses;
Bed and breakfast type environments.

This appliance should not be used for direct commercial purposes.

Heating Baby Feeding Bottles and Jars

Place the Bottle Warmer on a flat and stable surface. Be sure the warmer and the cord are out of the reach of children.
Insert the plug into wall outlet.
Remove the measuring cup from its holder and fill it with water to the appropriate fill line depending on the type of bottle you are heating and the temperature of its content.

Please refer to the table below for water required.

Bottle/Jar	Quantity of water required (ml)
Bottle/Jar	Room Temperature		Fridge Temperature
	Polypropylene bottle	Glass bottle	Polypropylene bottle	Glass bottle
Feeding bottle
60ml	9	5	10	6
90ml	12	5	12	7
120ml	12	5	14	7
150ml	12	10	14	13
180ml	12	10	14	13
210ml	12	10	14	14
240ml	12	12	15	16
270ml	13	13	15	16
300ml	13	13	16	17
330ml	14	14	16	17
360ml	15	15	18	18
Jar
130gr	NA	13	NA	19
200gr	NA	13	NA	19

Preheating is not necessary. Pour the pre-measured amount of water from the measuring cup into the warming chamber. Do not overfill. If too much water is used, the bottle may be heated for too long a period and reach too high a temperature. Overfilling may also cause damage to the unit.
Place the bottle/jar into the warming chamber.

For standard, narrow neck reusable bottles, snap the adaptor ring onto the top of the warming chamber. The ring will keep the bottle properly centered for even heating.
Press the button. The warming cycle starts.

Beware of steam from the warming chamber, do not put your hands in or around the warming chamber during warming.
When the warming cycle completed, the heater will shut off automatically. The light of ON button will turn off. Remove the bottle/jar at once to prevent residual warming. Bottle/jar may be hot, allow 1 minute to cool before handling.
ALWAYS shake bottle/jar well and test to ensure that the contents are at the desired temperature before feeding your child.

NOTE: Bottles/jars are warmed by steam produced by boiling the water. Dimensions, materials (glass or plastic) type and liquid quantity have an eff ect on the final temperature of the contents. If bottles/jars are not hot enough, use slightly more water next time. If bottles/jars are too warm, next time use less water into the warming chamber.

ALLOW AT LEAST 15 MINUTES FOR THE ELEMENT TO COOL BEFORE USING THE BOTTLE WARMER AGAIN.

Cleaning your Device

Always unplug your bottle warmer and ensure that it is cool before cleaning.
Bottle warmer unit: wipe the surface of the unit, as well as the inside of the warming chamber with a damp cloth or sponge using mild liquid soap. Wipe with clear water. Allow drying naturally. Do not immerse in water or any liquids.
Measuring cup, and adaptor ring: Dishwasher safe, top-rack only. Or wash in warm water using mild liquid soap. Rinse with clear water. Allow drying naturally.

NOTE: Do not use scouring pads, abrasive or solvents for cleaning. They may damage the appliance and its surfaces.

Descaling:
After a period of use, limescale will build up in the appliance (depending on the hardness of the mains water where the appliance is being used). You should remove this limescale at regular intervals to guarantee the function of the appliance. Limescale can cause performance to deteriorate considerably.

Do not use commercially-available descalers, pure acetic acid or vinegar essence.

To get rid of limescale, we recommend pouring 100ml of white vinegar and 100 ml of boiling water into the appliance and leaving it to take eff ect for 30 min.
NOTE: Longer periods will not improve descaling but may damage the appliance in the long term.
After this time, empty the appliance, rinse out twice with clean water and then wipe dry.

Disposal

Packaging:
When you wish to dispose of the packaging, please observe the relevant environmental regulations for your country.

Equipment:
The symbol with the crossed-out rubbish bin on wheels means that within the European Union, the product must be disposed of to a sorted rubbish collection. This applies to the product and all accessories which are marked with this symbol. Marked products must not be disposed of via the regular domestic waste but must be handed in to a recycling centre for electrical or electronic devices. Recycling helps to reduce the use of raw materials and to relieve the environment. It is therefore imperative that you follow the disposal regulations applicable in your country.