The Philips guarantee applies provided • Please use approved power cord the product is handled properly for provided by Philips all the time. If its intended use, in accordance with your power cord is missing, please its operating instructions and upon...
Page 4
1. Important • Unplug the monitor if you need to take shorter breaks more often at your workstation than longer breaks clean it with a slightly damp cloth. and less often; for example a 5-10 The screen may be wiped with a minute break after 50-60-minute dry cloth when the power is off.
1. Important imaging” or “ghost imaging” will 1.2 Notational Descriptions disappear gradually over a period The following subsections describe of time after the power has been notational conventions used in this switched off. document. Notes, Cautions and Warnings Throughout this guide, blocks of text Warning may be accompanied by an icon and Failure to activate a screen saver, or...
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, This marking on the product or on end-of-life management primarily its packaging illustrates that, under...
Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. stand into the base column.
Description of the On Screen Display What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Page 9
Basic and simple instruction on the Brightness 0~100 control keys Contrast 0~100 Sharpness To access the OSD menu on this Philips 0~100 SmartResponse O , Fast, Faster, Fastest Display simply use the single toggle SmartContrast On, O button on the backside of the Display...
2. Setting up the monitor Resolution notification 2.3 Remove the Base Assembly for This monitor is designed for optimal VESA Mounting performance at its native resolution, Before you start disassembling the 1920×1080@60Hz. When the monitor monitor base, please follow the is powered on at a different resolution, instructions below to avoid any possible an alert is displayed on screen: Use...
Page 11
3. Image Optimization 3. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. 0° 90° -5° * Display design may differ from those illustrated. Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
1. Toggle to the left to launch the with text applications, displaying images SmartImage on screen display. or watching a video, Philips SmartImage 2. Toggle to the up or down to select delivers great optimized monitor between FPS, Racing, RTS, Gamer 1, performance.
Developed for wellbeing, backlighting for clear, crisp, bright Philips LowBlue Mode setting uses a gaming and video images or displays smart software technology to reduce clear, readable text for office work.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type IPS technology Backlight W-LED system Panel Size 31.5" (80 cm) Aspect Ratio 16:9 Pixel Pitch 0.364 x 0.364 mm Contrast ratio (typical) 1200:1 Optimum Resolution 1920 x 1080 @ 60Hz Viewing Angle 178°...
Page 16
500 to 1060hPa (Non-operation) Environmental ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Glossy Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Other combinations Pixel Defect Policy of lit and dark sub pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing...
Page 20
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
Page 21
7. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Extended Warranty Period listed below.
• Disconnect the monitor from mains • First, ensure that the power button power source immediately for safety on the front of the monitor is in the • Contact with Philips customer OFF position, then press it to the service representative immediately. ON position.
Service contact information listed may cause "burn in", also known as in Regulation & Service Information "after-imaging " or "ghost imaging", Manual and contact Philips customer on your screen. "Burn-in", "after- service representative. imaging", or "ghost imaging" is a *Functionality different according to well-known phenomenon in LCD display.
Page 25
• Shut down your computer, subjected to excessive shocks disconnect your old monitor and and is protected from sharp or reconnect your Philips LCD monitor. blunt objects. When handling the • Turn on your monitor and then turn monitor, make sure that there is on your PC.
Page 26
Q14: Where can I find Regulation & "ghost imaging", on your screen. Service Information Manual mentioned "Burn-in", "after-imaging", or in EDFU? "ghost imaging" is a well-known Ans.: Regulation & Service Information phenomenon in LCD panel Manual can be download on the Philips website support page.
Page 27
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.