FJDynamics PowerSec MP2000 User Manual

Portable power station

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

PowerSec MP2000

User Manual

Thank you for purchasing the PowerSec MP2000 portable power station.

To ensure personal and property safety and proper use of the product, read this manual

carefully before operation and keep it for subsequent reference.

Charging Instructions

Before using the product, ensure that it is fully charged.

Table of Contents

Summary of Contents for FJDynamics PowerSec MP2000

Page 1 PowerSec MP2000 User Manual Thank you for purchasing the PowerSec MP2000 portable power station. To ensure personal and property safety and proper use of the product, read this manual carefully before operation and keep it for subsequent reference. Charging Instructions...
Page 2 Safety Instructions Read the following instructions before use to ensure your safety. Improper use may cause fire, property damages, or personal injuries. Instructions for use: 1) The charging power is up to 1,200 W. Use the provided AC charging cable for fast charging. Plug the cable directly into an AC wall outlet and ensure that the output current is higher than 10 A.
Page 3 Precautions for Charging 1) Charge the product with a 200-240 V power supply. 2) When using solar panels for charging, the open circuit voltage should not exceed 55 V. 3) The product must be charged with the original charging cables according to the specifications. FJ Dynamics is not liable for any damage caused by charging with third-party charging cables.
Page 4 What's in the Box? PowerSec MP2000 / solar charging cable / AC charging cable / 12 V car charging cable / user manual. PowerSec MP2000 Solar charging AC charging 12 V car User manual cable cable charging cable It is recommended to use DC 36 V 120 W/200 W/400 W/600 W solar panels.
Page 5: Table Of Contents
CONTENTS 1. Product Description ------------------------------------------------------------ 5 2. LCD Screen ------------------------------------------------------------------------ 6 3. Charging --------------------------------------------------------------------------- 8 4. Applicable Devices ----------------------------------------------------------- 10 5. Battery Replacement ---------------------------------------------------------- 11 6. Operation Instructions ------------------------------------------------------- 13 7. Specifications ------------------------------------------------------------------ 16 8. Troubleshooting --------------------------------------------------------------- 17 9. Maintenance and Warranty ------------------------------------------------- 17 FJ Dynamics Technology Co., Ltd.
Page 6: Product Description
Product Description ① ② ③ ④ ⑤ ⑥ ⑦ ⑧⑨ 1. LCD screen 2. 12 V/4 A DC5525 output port ×2 3. 12 V/8 A cigarette lighter output port 4. USB-C output port ×2 5. USB-A output port ×4 6. AC output port ×3 7.
Page 7: Lcd Screen
Buttons A: Main power button B: DC power button C: USB power button D: AC power button Button A: main power switch. Press to turn on or off the product. Button B: DC output switch. Before pressing this button to turn on DC output, ensure that the product is powered on.
Page 8 Battery indicator: indicates the battery level with a bar graph and a percentage. The battery level of 0-5% is shown with no bars, 6-20% with one bar, 21-40% with two bars, 41-60% with three bars, 61-80% with four bars, and 81% and above with all five bars. It is recommended to fully charge the product before using it for the first time.
Page 9: Charging
Charging AC wall charging Charging the PowerSec MP2000 with the AC charging cable takes 1.8 to 2.5 hours. When the battery level reaches 100% on the LCD screen, the battery is fully charged, and the charging input will be turned off in several minutes.
Page 10 Note: When the product is being charged, the total power of the devices connected through the AC output ports must not exceed 1,100 W. Otherwise, the charging current will decrease. Charging time From solar panel 600 W 4-5 hours Depending on solar conditions From wall outlet 1.8-2.5 hours Solar charging...
Page 11: Applicable Devices
12 V car charging cable Charging the product with the provided car charging cable takes 32 to 34 hours. When the battery level reaches 100% on the LCD screen, the product is fully charged. Cigarette lighter plug Car charger Caution: Do not charge the product with solar panels and the car charger at the same time. Applicable Devices CPAP without heated GoPro (5.9 Wh)
Page 12: Battery Replacement
Battery Replacement 1) Before replacing the battery, turn off the product. Turn off 2) Open the upper cover of the product and turn off the battery. Open Turn off FJ Dynamics Technology Co., Ltd. All rights reserved.
Page 13 3) Disconnect the battery from the socket, loosen the screws, remove the metal plate, and then take out the battery. Disconnect from the socket Loosen the screws and remove the metal plate Take out the battery FJ Dynamics Technology Co., Ltd. All rights reserved.
Page 14: Operation Instructions
4) Place in the new battery, insert the metal plate, tighten the screws, and then connect the battery to the socket. 5) Turn on the battery, and close the upper cover. New battery Turn on Operation Instructions Charging Charging the product with the provided AC charging cable takes 1.8-2.5 hours. The real-time battery level is displayed on the LCD screen during charging and reaches 100% when the product is fully charged.
Page 15 Overload If the output ports are overloaded, the product automatically turns off the output and displays fault code “E08” on the LCD screen. Discharging Press the main power button for 1s to turn on the product, and 3s to turn off the product. With an advanced battery management system, the product can charge the connected devices through AC, DC, and USB output ports.
Page 16 Cleaning Disconnect the product from all power supplies and output devices before wiping it with a clean, dry, and non-soft cotton cloth. Remove all foreign objects, dirt, or other obstructions from the surface and inside of the vents on both sides. Avoid entry of debris, dirt, or other objects into the product during the vent cleaning.
Page 17: Specifications
Specifications General Rated capacity 2,264 Wh Net weight Approx. 27 kg Size 574 mm x 369 mm x 259 mm Input AC input voltage AC 200-240 V, 50 Hz AC input power AC 1,200 W max. Photovoltaic input port (×2) DC 12-55 V/600 W max.
Page 18: Troubleshooting
Troubleshooting When the product does not discharge: 1) Check whether the cable is connected properly. 2) Check whether the total output power exceeds the rated value. 3) Check whether the temperature of the product is too high. When the product cannot be charged: 1) Check whether the AC wall outlet is in good condition and the AC charging cable is properly connected.