Step 4: Remove 4 screws from the rear panel.
Step 5: Lay the rear panel and remove the Fan Unit as arrow shown.
6.2.6. Disassembly and checking of the AC Inlet P.C.B., Power P.C.B. and
Transformer P.C.B.
Follow Step (1) to Step (5) described in section 6.2.4.
Follow Step (1) to Step (3) described in section 6.2.5.
Step 1: Remove the P.C.B. support by pushing the claws as arrow shown.
Step 2: Disconnect the connector (CN502).
Step 3: Lift up the AC Inlet P.C.B. as arrow shown.
16
PDF created with pdfFactory Pro trial version
www.pdffactory.com