Summary of Contents for SUBADA S7608
- Page 1 INSTRUCTION MANUAL BOTTLE & POUCH WARMER (Model: S7608) Read this user manual carefully before you use the bottle warmer and save it for future reference...
- Page 2 13. Do not use any accessories other than those supplied with this appliance. 14. If the cordis correctly placed in the tidy the product will sit level.Do not start using the product S7608 if it is not sitting level. 15. Regularly check the cord and plug for signs of damage, if visible remove from use immediately.
- Page 3 Check the appropriate voltage to plug in the power supply. The bottle warmer is stand by when the light is flickering.The appliance is switched on when the light is lit. when plug in machine, long press for 2 seconds to enter MUTE mode, after press the power button, machine will enter into standby state, it can adjust the temperature or time, it can change quickly when long press the button.
- Page 4 NOTE: NOTE: 1. SUBADA recommends to feed your baby as soon as possible after the milk is warmed.We advise not to reheat the milk after it has 1. Due to the high variety of baby food consistencies, it is strongly recommended to cooled down again.
- Page 5 FOOD WARMING SETTING 5. Please feed after a warming test with a spoon to ensure the food is suitable for baby. (Fig.12) 1. Place the food container/ jar (heat-resistant) in the bottle warmer (Fig.8) NOTE: 1. Due to the high variety of baby food consistencies, it is strongly recommended to continuously stir and check while you are warming the baby food for an optimal result.
- Page 6 lt is recommended to descale the bottle warmer every four weeks to ensure it continues to work efficiently. STERILIZE 3. Select , the indicator light above will lit. (Fig.15) 1. Mix 50m/1.7oz of white vinegar with 100ml/3.4oz of cold water to descale the The bottle warmer is automatically off and the disinfection process is bottle warmer.
Need help?
Do you have a question about the S7608 and is the answer not in the manual?
Questions and answers