Advertisement
Quick Links
Sundara
Drift Triple Basin
®
Hand Washing System
All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the
date of purchase. Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are
notified in writing of such defect and the goods are returned to us prepaid at Atlanta, GA, with evidence that they have been properly
maintained and used in accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages
whatsoever, including incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the
defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his intended use and the
purchaser assumes all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantabil-
ity is expressly excluded. If the products sold hereunder are "consumer products," the implied warranty of merchantability is limited to a
period of three years and shall be limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists are
approximate and are not guaranteed.
WARNING: Cancer and Reproductive Harm -
ADVERTENCIA: Cáncer y daño reproductivo -
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction -
NOTE: The information in this manual is subject to change at any time without notice. Installations may
be performed at different times of construction by different individuals. For this reason, these instructions
should be left on-site with the facility or maintenance manager.
NOTE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT.
Zurn Industries, LLC
|
Commercial Brass Operation
511 W. Freshwater Way, Milwaukee, WI U.S.A. 53204 · Ph. 1-855-ONE-ZURN, Fax 919-775-3541
In Canada
|
Zurn Industries Limited
7900 Goreway Drive Unit 10, Brampton, Ontario L6T5W6 · Ph. 905-405-8272, Fax 905-405-1292
www.zurn.com
Z5003.03
Sundara
Drift Triple Basin
®
Hand Washing System
Installation, Maintenance,
and Parts Manual
PATENT(S) PENDING
LIMITED WARRANTY
www.P65Warnings.ca.gov
www.P65Warnings.ca.gov
www.P65Warnings.ca.gov
Rev.
A
Date:
4/27/2018
C.N. No.
SAN008271
Form No.
FV613
Advertisement
Related Manuals for ZURN Sundara Z5003.03
Summary of Contents for ZURN Sundara Z5003.03
- Page 1 NOTE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT. Rev. Zurn Industries, LLC Commercial Brass Operation 511 W. Freshwater Way, Milwaukee, WI U.S.A. 53204 · Ph. 1-855-ONE-ZURN, Fax 919-775-3541 Date: 4/27/2018 In Canada Zurn Industries Limited C.N.
- Page 2 Specifications: Sundara Drift triple basin lavatory system manufactured by Zurn Industries. Lavatory shall be mounted at standard height to ® conform with ANSI, UFAS, TAS and ADA Accessibility Standards. Counter and integral basin to be constructed of Sundara ®...
- Page 3 Z5003.03 Parts List Item Name Optional Basin Shroud Shroud Wall Bracket Mounting (L) Bracket "Wall Hanger Bracket (Available only for Retrofit)" Grid drain Water Supply Items Drain Adapter Assembly P Trap Assembly 10 Sensor Faucet 11 Soap Dispenser (If Ordered) 12 "5/16-18 Screw for Mounting L Bracket to Basin"...
- Page 4 Plumbing and Electrical Rough-Ins FV613 Rev. A 4/27/2018 Page 4...
-
Page 5: Required Tools
Required Tools: Torx Wrench: Socket Wrench: Non-toothed Wrench T10 & T25 5/16” & 3/8” L Brackets Installation For ease of installation, lay basin on its top surface on a cushioned surface. Use socket wrench to torque the screws (approximately 4-5 complete turns bottom out approximately 5 ft-lbs of torque). Warning: Do not overtighten the screws. - Page 6 Retrofitting Hanger Bracket Installation Wall Stud Hanger Bracket 3 1 2 [89] 3 1 2 [89] 4 [99] 3 1 2 [89] 3 1 2 [89] 4 [99] 1 [25] 1 [25] Bolt supplied by installer to attach Plywood the plywood to wall studs Wall Stud Drywall...
-
Page 7: Installing Mounting Bracket
Installing Mounting Bracket • Secure the mounting bracket to the plywood cut-out with supplied washers, bolts and toggle an- chors on the plywood. Plywood Wall Stud Mounting Bracket Bolt supplied by installer to attach the plywood to wall studs Warning: Must be handled by at least 3 people Warning: Ensure the basin back edge is completely supported in the wall bracket. -
Page 8: Faucet Installation
Installing with Carrier Option Optional Wast Line Sleeve (-WL) Z1240-EZR Carrier System Warning: Must be handled by at least 3 people Avertissement : s’y prendre à trois minimum. Refer to Carrier Rough-in & Installation guide for details. Faucet Installation Refer to faucet installation guide for details. FV613 Rev. - Page 9 Soap Dispenser Installation Install the soap spout on right or left as applicable. Refer to soap dispenser installation guide for details. Soap Dispenser Bracket and Bottle Installation Refer to soap dispenser installation guide for details. FV613 Rev. A 4/27/2018 Page 9...
- Page 10 P Trap Installation & Water Supply Connection to Faucet Connect the tail piece to drain adapter (threaded connection) Adjust the tail piece base on drain outlet on the wall. Grid Drain Installation Use T10 Torx wrench to attach the grid drain to basin. Torque screws until the screw heads are flushed with the screw pocket of grid drain.
-
Page 11: Shroud Installation
Shroud Installation: Step 2 Pivot Point Pivot Point • Align wall bracket as shown and install coarse screw on each side. Mark the slots in the wall bracket on the wall. (Note: Anchors and bolts location can be flexible base on on-site wall studs location) (Note: A minimum of one anchor next to each pivot point is required to prevent excessive flexing when shroud is in fully open position) Step 2... - Page 12 Shroud Installation: Step 4 • Place shroud on hanger hooks of wall bracket as shown. Then, insert each clevis pin through the 2 pivot points. (Note: the shroud will likely need to be rotated upward slightly in order to install each pivot. •...
- Page 13 Repair Instructions: • Zurn recommends that damages should be repaired by certified solid surface fabricator or repair agents. • Blemishes to the basin surface (such as scratches, burn marks, and minor chipping) can be repaired by sanding with super-fine(800 or 1000 grit) sand paper and/or maroon Scotch-Brite™...
Need help?
Do you have a question about the Sundara Z5003.03 and is the answer not in the manual?
Questions and answers