3. Option Edit
1) PC IP setting
IP:
192.168.0.11
Subnet:
255.255.255.0
Gateway: 10.168.0.1
2) Open MP tool and click "AutoUpdate".
3) Check Option Transmission and select option fi le by "File open" button.
4) Set power on and wait for booting fi nish.
5) Press "ADD" button after connect LAN cable right away.
6) Download result is "OK" or "NG".
4. Micom Option Edit (Need a HTS Remote control)
1) Hidden mode : Remote control "2" + "Vol-" key
2) Change option code by remote control.
3) After option changed, press 'Enter' key for displaying "WRITE OK" on VFD.
4) Press remote control "2" + "Vol-" key again. VFD shows "E2P CLR".
And Sound Bar will reboot automatically.
1-9