Hive Signal Booster - Extender User Manual
Getting started
- Choose a location
Your signal booster should be plugged into a mains power socket about half way between your Hive hub and the device that has low signal strength or can't connect. - Plug your signal booster in and switch the power socket on
The light on the front will begin to flash amber whilst the signal booster searches for your hub. - Add your signal booster
You can do this using your Hive app or the online dashboard.
Using the online dashboard: - Log into your account at hivehome.com
- Under Settings select Install Device.
Your hub will then start looking for your signal booster.
Using the Hive app: - Open the Hive app on your phone, you may be asked to log-in.
- Tap the Menu button and then Install Device. Your hub will then start looking for your signal booster.
Once your signal booster appears on the screen, you can name it and press Save to complete setup.
Remember: Once your signal booster is installed, please leave the power to it switched on, including the extension cable if you're using one.
- That's it!
The LED light on your signal booster will now be green and your Hive devices will automatically talk to your hub.
Usage
Your signal booster is designed for UK household wiring, and for indoor use only.
Maintenance
Disconnect your signal booster before cleaning and keep it away from water and other liquids at all times. The signal booster does not contain any serviceable parts so do not attempt to open it.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Hive Signal Booster - Extender User Manual
Need Assistance?
Do you have a question about the Signal Booster that isn't answered in the manual? Leave your question here.