Table of Contents
Advertisement
Advanced Settings
Dynamic Range: Compensates for
differences in the audio level
between different channels.
Note
• The effect may not function or may vary
depending on the program regardless of
the [Dynamic Range] setting.
Dolby Digital Plus Out: Select
[Auto] to pass through Dolby
Digital Plus stream to ARC when
Dolby Digital Plus is available
through connected Audio
System.
During Dolby Digital Plus stream
is output, Digital Audio Out
(optical)* is muted.
Select [Off] to convert Dolby
Digital Plus stream to Dolby
Digital for both ARC (Audio
system) and Digital Audio Out
(optical)*.
HE-AAC Audio Level: Adjust the
HE-AAC audio sound level.
MPEG Audio Level: Adjusts the
MPEG audio sound level.
* Only on limited region/country/TV model.
Screen
Wide Mode
For details about wide mode, see
page 17.
Auto Wide
Automatically changes the wide
mode according to the input signal
from an external equipment.
4:3 Default
Sets the default [Wide Mode] for a 4:3
input signal.
Auto Display Area
Select [On] to automatically adjusts
the display area based upon the
content or [Off] to choose from the
[Display Area] options.
Display Area
Adjusts the picture display area.
24
US
H Center
Adjusts the horizontal position of the
picture.
V Center
Adjusts the vertical position of the
picture.
Vertical Size
Adjusts the vertical size of the picture
when [Wide Mode] is set to [Wide
Zoom].
PC Settings
Adjust the picture size, see page 17.
Channel Setup
Cable/Antenna
Cable: Select if you are receiving
cable channels via Cable TV
provider.
Antenna: Select if you are using an
antenna.
Auto Program
Automatically sets up the channel list
on the TV for all receivable channels.
Select [Auto Program].
Select [OK] to automatically sets up
the channel list.
Add Digital Channels
Select [Add Digital Channels].
Select [OK] to add digital channels.
Show/Hide Channels
Allows you to show or hide channels
that appear when you use the CH +/–
buttons.
Press / to scroll through the
channels until you find the channel
you want to show or hide. Then press
to select it.
Press / to determine if the channel
will be shown or hidden. Then press
to select it.
Advertisement
Table of Contents
