Table of Contents
Advertisement
Image Stabilizer
The camera detects jitter during recording and automatically corrects it, so
you can record images with reduced jitter.
• When using a lens with an O.I.S. switch, set the switch on the lens to ON.
• When you use a lens with no connection function with the camera,
[Stabilizer] cannot be selected.
• When you use a lens without the stabilizer function, [Operation Mode]
cannot be selected.
Image Stabilizer Settings
Set the image stabilizer operation to match the recording situation.
[
] / [
]
[Operation
Mode]
[E-Stabilization
(Video)]
Select [Stabilizer]
Sets the stabilization movement (blur) to match the recording
method (normal, panning). (
This will stabilize strong jitter. [
[HIGH]
on the screen during video recording.
This will stabilize jitter. [
[STANDARD]
the screen during video recording.
This will turn off the electronic stabilization
[OFF]
(Video).
Camera shake during video recording is corrected along
the vertical, horizontal, roll, pitch, and yaw axes through the
combined use of the in-lens and electronic image stabilizers.
(5-Axis Hybrid Image Stabilizer)
• If the recording screen icon is not indicated with [
[
] even when Panasonic interchangeable lens that
supports Dual I.S.2 is being used, update the lens firmware
to the latest version. For the latest information on supported
lenses or to download their firmware, refer to our support site.
(13)
• When using an interchangeable lens that does not support
Dual I.S.2 or when [Operation Mode] is set to [OFF], [
(Strong) or [
] (Standard) is displayed.
6. Drive/Image Stabilizer
)
] is displayed
] is displayed on
DVQX2052 (ENG)
] or
]
57
Advertisement
Table of Contents
