Roland RAD-99 Setting Manual

201a
Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES."
These sections provide important information concerning the proper operation of the unit.
The manual should be saved and kept on hand as a convenient reference.
202
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND
CORPORATION.

USING THE UNIT SAFELY

Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be
improperly.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
001 106
• Before using this unit, make • Never climb on top of, nor
sure to read the instructions place heavy objects on the
below, and the Setting unit.
Manual.
......................................................................
.......................................................................
116
003
• When assembling, be careful
• Do not attempt to repair the
not to allow fingers or other
unit, or replace parts within it
areas to get pinched.
(except when this manual
provides specific instructions
......................................................................
directing you to do so). Refer
118a
• Should you remove screws,
all servicing to your retailer,
keep them in a safe place out
the nearest Roland Service
of children's reach, so there is
Center, or an authorized
no chance of them being swallowed
Roland distributor, as listed
accidentally.
on the "Information" page.
......................................................................
.......................................................................
013
• In households with small
children, an adult should
provide supervision until the
child is capable of following
all the rules essential for the
safe operation of the unit.
.......................................................................
014
• Protect the unit from strong
impact.(Do not drop it!)
.......................................................................
Setting Manual
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
used
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
●
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.

IMPORTANT NOTES

291a
In addition to the precautions given in
"Using the Unit Safely" in this
manual, please also read and observe
the following:

Maintenance

401a
• For everyday cleaning wipe the unit
with a soft, dry cloth or one that has
been slightly dampened with water.
To remove stubborn dirt, use a cloth
impregnated with a mild, non-
abrasive detergent. Afterwards, be
sure to wipe the unit thoroughly with
a soft, dry cloth.
Check That All Items Were
Received
● Device carrier (with 4 screws attached)
fig.mount.eps
● Rack carrier (left/right)
fig.bracket-l.eps
* Assembly requires a Phillips screwdriver (not included).
962a
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.

How to Assemble

116
When assembling, be careful not to allow fingers or
other areas to get pinched.
1.
Remove the 4 screws from the device carrier.
Screw
Device carrier Screw
2.
Arrange the device carrier and the rack mounting
hardware (left) as shown in the figure, and attach at
mounting hole A using one of the screws you removed.
Device carrier
A
Screw
Rack carrier (left)
3.
Attach at mounting hole B using one of the removed
screws. You can attach at any desired angle from 1 to 6.
6
5
4
3
B
2
Screw
1
B
4.
Arrange the device carrier and the rack mounting
hardware (right) as shown in the figure, and attach at
mounting hole A using one of the screws you removed.
Device carrier
A
Screw
Rack carrier (right)
5.
Attach at the same angle as the mounting hole used for
attachment in step 3.
6
5
4
3
2
B
1
B
Device carrier
Screw
Rack carrier (right)
6. Secure a compatible device to the device carrier. For
more information, read the owner's manual that came
with your device.
When mounting a compatible device on the device carrier, be
sure to secure it in place using the specified screws. Using
screws other than those specified may cause internal damage
to the equipment or result in inadequate mounting.
07-02-1