Table of Contents
Advertisement
3 Insert the loaded drive tray into the empty drive bay.
Note:
Make sure that the drive tray is completely inserted. Otherwise, the drive might not function properly.
4 Push the handle inward to secure the drive tray.
5 Insert the drive tray key into the drive tray lock, turn the key clockwise (to the "I" position) to lock the drive tray
handle, and then remove the key.
6 Repeat the steps above to install the other drives you have prepared.
7 Drives are numbered as shown below.
1
5
Note:
If you plan to create a RAID volume, we recommend installing drives of identical size to make the best
use of drive capacity.
13 Chapter 2: Hardware Setup
2
3
6
7
4
8
Advertisement
Table of Contents
