HP 645 G3 Maintenance And Service Manual page 89

12. Keyboard (see Keyboard on page
13. Hinge covers (see Hinge cover on page
14. Base enclosure (see
15. System board (see
16. Fan/heat sink assembly (see
17. Top cover (see Top cover and TouchPad on page
Remove the display assembly:
1. Position the computer upright, with the front toward you.
2. Open the computer.
3. Remove 2 screws from each hinge (1) and then remove the display (2):
Remove the display assembly components:
1. If it is necessary to replace the display bezel:
a. Close the computer, position it so you can access the bottom of the display, and then open the
computer slightly.
47).
53).
Base enclosure on page
System board on page 57).
Fan and heat sink assembly on page
55).
59).
63).
Display assembly 81