How To Run Bios Setup; Bios Setup Menu - Monster TULPAR T7 V21.4 User Manual

4.1.2 How to Run BIOS Setup?

To run the BIOS Setup Utility, turn on the notebook and press the [Del] key
during the POST procedure.
If the message disappears before you respond and you still wish to enter Setup,
either restart the system by turning it OFF and ON, or simultaneously pressing
[Ctrl]+[Alt]+[Del] keys to restart.
Be noted that the screen snaps and setting options in this chapter are for your
references only.The actual setting screens and options on your Notebook may
be different because of BIOS update.
The setup function only can be invoked by pressing [Del] or [F2] key during
POST that provide a approach to change some setting and confguration the
user prefer, and the changed values will save in the NVRAM and will take effect
after the system rebooted. The setup uses a menu interface to allow the user to
confgure their system and the features are briefly listed as follow.
Press [F7] key for Boot Menu.
The drivers, BIOS and utilities bundled in the support DVD may vary by
NOTE
models and are subject to change without notice.

4.2 BIOS Setup Menu

Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen.
Select the tags to enter the other menus.
Main Menu
Advanced Menu
Security Menu
Boot Menu
EXIT Menu
Show system overview about memory size and setting of
system time and date.
To select the XD feature enable or disable XD
feature only work with Intel platform + Windows.
Install or clear the password settings for
supervisor and user.
Confgure Settings during System Boot.
Save or discard the changes before leaving the
BIOS Setup Menu.
EN
19