Installing The Body; Installing The Battery Pack - Traxxas TRX4 Scale and Trail Crawler Owner's Manual

Battery iD
Traxxas recommended
battery packs are equipped
with Traxxas Battery iD. This
exclusive feature allows
Traxxas battery chargers (sold
separately) to automatically
recognize connected battery
packs and optimize the
charge settings for the
battery. This eliminates
the need to worry over
charger settings and menus
for the easiest and safest
charging solution possible.
Visit Traxxas.com to learn
more about this feature and
available Traxxas iD chargers
and batteries.
4 4
14 • TRX-4
TRAXXAS TQ RADIO SYSTEM
i

INSTALLING THE BODY

Your TRX-4 2021 Ford Bronco includes an innovative latching system
(patent pending) for securing the body to the chassis (body clips are
not required).
To remove the body for chassis access:
1. Reach beneath the front and rear inner fenders and pull the latches
toward the outside of the truck body to release them.
2. Push up on the latches to fully disengage the latches from the inner
fenders.
3. Lift the body straight up from the chassis. Lift the front and rear of
the body evenly or it may become difficult to remove.
To reinstall the body:
1. Position the body on the chassis. Align the left and right sides with
the rock sliders and the front and rear of the body with the bumpers.
2. Press down on the body at each latch location until the latches snap
into place.
Note: To keep the clipless system functioning properly, periodically
inspect and clean the latches in the body and the slots on the inner
fenders. If dirt and grime accumulate on these components, the
clipless system will not operate smoothly.

INSTALLING THE BATTERY PACK

WARNING: Do not pinch the battery wires or connector.
Install the battery pack with the battery wires facing the rear of the
model. Swing the battery hold down towards the chassis and snap
(lock) the end into the front hold-down retainer.
Note: The battery hold down can be rotated on its pivot to
accommodate different height battery packs.
The Traxxas High-Current Connector
Your model is equipped with the Traxxas High-
Current Connector. Standard connectors restrict
current flow and are not capable of delivering
the power needed to maximize the output of
the XL-5 HV. The Traxxas connector's gold-plated terminals with large
contact surfaces ensure positive current flow with the least amount of
resistance. Secure, long-lasting, and easy to grip, the Traxxas connector
is engineered to extract all the power your battery has to give.