Advertisement
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your
appliance.
Important – Plug and Fuse Information
The wires in the cord are coloured as follows:
Green and Yellow = Earth
Blue = Neutral
Brown = Live
If the plug supplied with your appliance has a fuse fitted it is rated either 10A or 13A. If
the fuse fails it must be replaced with one of the same rating.
If the plug or cord requires replacing a new cord set should be fitted by an Authorised
Kenwood Repairer.
WARNING: THIS APPLIANCE MUST BE EARTHED.
Note:
For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the
fuse cover is lost then the plug must not be used until a replacement can be obtained.
The correct fuse cover is identified by colour and a replacement may be obtained from
your Kenwood Authorised Repairer (see Service).
If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric
shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into
a 13A socket outlet.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended
to come into contact with food.
Before Using For The First Time
Wash the parts: see 'Care and
Cleaning' section.
Key
Attachment Outlets
High-speed outlet
1
Slow-speed outlet
2
Bowl tool socket
3
Mixer
High speed outlet cover
4
Mixer head
5
Mixer ready indicator light
6
Speed control dial
7
Head release lever
8
Power unit
9
Easyweigh scales
10
a
display screen
b On/Zero button
c kg/lb button
Bowl
11
Slow speed outlet cover
12
Head Cover
13
K-beater
14
Whisk
15
Dough tool
16
Splashguard
17
Note: Spanner shown is for illustration
purposes only and is not supplied in
pack.
Optional Attachments
There are a range of optional
attachments available to use with
your Stand Mixer. See the attachment
leaflet included in your pack or visit
www.kenwoodworld.com to see the full
range and how to buy an attachment
not included in your pack.
Note: Slow Speed Outlet Attachments
The slow speed outlet on your Stand
Mixer model features the Twist
Connection System. It is designed
to accept Twist Connection System
attachments.
When purchasing new attachments for
the slow speed outlet you should check
compatibility with your Stand Mixer. All
4
Advertisement
