Download Print this page
ebm-papst 3950 M Operating Manual

ebm-papst 3950 M Operating Manual

Advertisement

Quick Links

Operating manual
3950 M
Product type, manufacturing date (calendar week/year of construction)
and if required, conformity mark can be found on the nameplate on the
product.
Please provide us with the contents of the nameplate when making
enquiries about the product.
ebm-papst St.Georgen GmbH & Co. KG
Hermann-Papst-Straße 1
D - 78112 St.Georgen
Phone: +49 (0) 7724 / 81-0
Fax: +49 (0) 7724 / 81-1309
info2@de.ebmpapst.com
www.ebmpapst.com
As per: 04.06.2012
Version 1 0
Article number: 9282708113
Original operating manual
INDEX
1 SAFETY REGULATIONS AND INFORMATION
2 INTENDED USE
3 TECHNICAL DATA
4 CONNECTION AND COMMISSIONING
5 FAULTS, POSSIBLE CAUSES AND REMEDIES
6 APPROVALS
1
SAFETY REGULATIONS AND INFORMATION
Read the operating manual carefully before commencing work at the
product. Pay attention to the following warnings to avoid risk to
persons or malfunctioning.
This operating manual is an integral part of the product.
In the event of resale or change of ownership the operating manual
must accompany the product. This operating manual may be copied
and provided as information on potential risks and their avoidance.
Hazard classification of warning notices
The following risk ratings are used in this operating manual to denote
potential risk situations and important safety instructions:
Qualification of personnel
Only skilled electricians are permitted to install the product, to carry out
the test run and to work at the electrical unit.
Only instructed and authorized skilled personnel are permitted to
transport, unpack, operate and service the product.
Basic safety regulations
1
Safety risks related to the product must be reassessed after installing
in the final device.
The operating manual was developed in accordance with European
2
market requirements and may need adapting to the market
requirements of the country in question.
3
When working at the product, observe the following:
Do not make any changes to the product.
3
4
4
page 1 of 4
DANGER
This is a potentially dangerous situation
and warns of an impending health risk
or risk of fatal injury if this warning is
not observed. Observe this warning.
WARNING
The dangerous situation can occur and
can result in major or fatal injuries if the
warning is not observed. Work with
extreme care.
CAUTION
The dangerous situation can occur and
can result in minor injuries or damage
to property if the warning is not
observed.
NOTE
A potentially dangerous situation can
occur and results in damage to
property if not avoided.
WARNING
Impermissible high load
Stop the product immediately after
impermissible loading (e.g. impact,
heat, overvoltage).

Advertisement

loading

Summary of Contents for ebm-papst 3950 M

  • Page 1 The dangerous situation can occur and enquiries about the product. can result in major or fatal injuries if the warning is not observed. Work with ebm-papst St.Georgen GmbH & Co. KG extreme care. Hermann-Papst-Straße 1 CAUTION D - 78112 St.Georgen...
  • Page 2 Electrical voltage and current Transport DANGER Only transport the product in its original packaging. Secure during Electrical voltage transport. The vibration values, temperature and climate ranges should not be Regularly check the electrical exceeded during transport. equipment of the product. Eliminate immediately loose Storage connections and defective cables.
  • Page 3 Connect electrical parts usage at altitudes higher than 2000 meters. Connect to the mains after installation. Contact ebm-papst if you have specific queries regarding the product. DANGER Do not touch. Risk of fatal injury TECHNICAL DATA from electrical current.
  • Page 4 inspection yearly Fixation of product Visual min. 1/2 inspection yearly Fixation of wires Visual min. 1/2 inspection yearly Fixation of protective earth Visual min. 1/2 connection inspection yearly Insulation of wires Visual min. 1/2 inspection yearly Check impeller for Visual min.