Advertisement
When the sanding pad is worn, it no longer has a firm grip on the sanding sheet, so it
must be replaced.
Assembly of a dust collector
Use a dust extraction device suitable for the material.
Insert the connection adapter into the outlet of the sander.
For the suction of dust particularly harmful to health, carcinogenic or dry, use specific
vacuums.
After completing the work, empty the dust collection bin.
Switching ON/OFF
Unlock the ON/OFF switch trigger lock button. Press the On/Off switch to start the power
tool. To stop the power tool, release the On/Off switch.
Instructions of use
For rough sanding, use a coarse grit sheet. Lightly squeeze the sander to allow it to run at
a higher speed for better material removal.
For finishing sanding, use a fine grit sanding sheet. By varying the pressure slightly or
changing the speed of rotation, you can reduce the speed of the sanding plate while
maintaining the eccentric movement. Guide the sander to the workpiece using circular
motions or alternating longitudinal or transverse passes.
An abrasive sheet with which to sand a metal should not be used for other materials.
For the polishing of varnished surfaces, it is possible to provide the sander with appropriate
sanding is such as felt sheepskin disc or polishing sponge. Choose a low speed to prevent
excessive heating of the surface.
Let the tool to run empty for a few minutes after a strong load to cool the power tool.
Take care to ensure sufficient dust extraction during operation.
Maintenance
Warning Unplug the tool before inspection, cleaning and repair
Cleaning
Clean the air vents regularly with dry compressed air. Never try to clean in inserting sharp
objects into the air vents.
Do not use aggressive chemical detergents to clean plastic parts. Various chemicals can
corrode and damage parts. Use only a clean cloth to remove dirt, oil, grease and dust.
7
Advertisement
