Advertisement
Table of Contents
Congratulations on your purchase of our COMFORT II
Fire Pit Insert! The Burly patented design and our
American made craftsmanship will provide warmth
for years to come. The product is designed to protect
your hardscape investment and to increase your
outdoor experience with a clean burning fire and
reduced smoke technology. Please make sure to read
the warranty, maintenance, safety and installation
instructions before using your product. ENJOY!
Installation Instructions:
1.
It is important that your fire pit is at least 15"
in depth. This will allow for enough air flow
underneath the fire pit insert. If the base of
the insert is touching something, it could
affect the air flow.
2.
Make sure that there is a clean surface
beneath the insert.
3.
Next, using two people set the fire pit insert
into the block/stone surround with the flange
resting on the top block or cap piece.
CO MFO RT I I F I R E PI T I N SE RT
OWNE R' S M A NUA L
One-Piece
Unit
Snuffer Lid
(Included)
Advertisement
Table of Contents
Summary of Contents for Burly COMFORT II
- Page 1 CO MFO RT I I F I R E PI T I N SE RT OWNE R’ S M A NUA L Congratulations on your purchase of our COMFORT II One-Piece Unit Fire Pit Insert! The Burly patented design and our American made craftsmanship will provide warmth for years to come.
- Page 2 For Best Results: Make sure to burn only dry, seasoned hardwood in your COMFORT II fire pit. This will ensure a hotter, cleaner fire with very little smoke. When starting your fire, use cardboard or paper with small pieces of kindling and two or three dry pieces of split hardwood on top.
Need help?
Do you have a question about the COMFORT II and is the answer not in the manual?
Questions and answers