AQUALUX AQL-155 Installation & Care Instructions

AQL-155
Installation & Care Instructions
- - Thank for purchasing an Aqualux Lighting product. Thank for purchasing an Aqualux Lighting product.
- - Please follow these instructions carefully. Please follow these instructions carefully.
- - Your warranty and safety depends on it. Your warranty and safety depends on it.
- - All wiring must be in accordance with local regulations. All wiring must be in accordance with local regulations.
- - If a fault or failure occurs, please contact Aqualux to If a fault or failure occurs, please contact Aqualux to
arrange servicing. arrange servicing.
- - It is recommended to wash the luminaire with fresh water from It is recommended to wash the luminaire with fresh water from
time to time to stop salt and corrosive elements building up. time to time to stop salt and corrosive elements building up.
- - Do not attempt to service the product. Do not attempt to service the product.
1 1
Pavers Pavers
AQP-09-0016 recommended AQP-09-0016 recommended
56mm
Ø
Drill at least 125mm depth and 56mm Drill at least 125mm depth and 56mm
diameter hole. Use AQP-09-0016. diameter hole. Use AQP-09-0016.
2 2
Set light fitting into paver Set light fitting into paver
P ver
Allow dequ te sp ce
1. 1.
between F tt n nd
Condu t for Connectors
ondu t recommended
C
Ø 56mm
3 3
Use silicone sealant under dress Use silicone sealant under dress
ring for firm hold on paver. ring for firm hold on paver.
1. Illustration depicts AqualuxPlus cable connectors. AQL-155 and AQL-530 only. 1. Illustration depicts AqualuxPlus cable connectors. AQL-155 and AQL-530 only.
Formed concrete pour, Formed concrete pour,
1 1
set and fix PVC sleeve AQP-09-0016 set and fix PVC sleeve AQP-09-0016
recommended recommended
Drill at least 125mm depth and 56mm Drill at least 125mm depth and 56mm
diameter hole. Use AQP-09-0016. diameter hole. Use AQP-09-0016.
2 2
Set light fitting into concrete Set light fitting into concrete
P ver
ondu t recommended
C
3 3
Use silicone sealant under dress Use silicone sealant under dress
ring for firm hold on concrete. ring for firm hold on concrete.
Order code configuration & customised datasheets. Voltage drop calculator & LED technical information. Order code configuration & customised datasheets. Voltage drop calculator & LED technical information.
YOUR WARRANTY RELIES ON CORRECT INSTALLATION & CARE.
Check product label for correct power requirements.
Do not connect to mains (240V).
Do not "hot-plug" lighting fixture - i.e. do not connect to energised power supply.
Ensure cable termination is fully sealed and all joins are heat-shrinked or encapsulated.
Ensure cable glands are hand tightened and end caps secured after transit & installation.
Do not attempt to field service Aqualux fittings without prior instruction.
Do not look directly at LED light source - it will damage your eyes!
For surface mount, a bead of silicone between surface and fitting is recommended.
These notes must be observed for the Aqualux Warranty to apply.
AQL-155 / 24V AC / DC 24V AC / DC
AQL-155 /
Ø 56mm
Allow dequ te sp ce
1. 1.
between F tt n nd
Condu t for Connectors
Ø 56mm
Visit www.aqualux.com.au for:
All specifications subject to change. Copyright © 2019. All specifications subject to change. Copyright © 2019.
IP67 IP67
1 1
Timber decking Timber decking
56mm
Ø
56mm diameter hole. Allow at least 85mm 56mm diameter hole. Allow at least 85mm
depth required for light fitting and cable depth required for light fitting and cable
connections. No sleeve required. connections. No sleeve required.
2 2
Set light fitting onto deck Set light fitting onto deck
1. 1.
3 3
Use silicone sealant under dress Use silicone sealant under dress
ring for firm hold on timber deck. ring for firm hold on timber deck.
1300 662 644
sales aqualux.com.au
@
Full product details and available options. Full product details and available options.
2020.v1 1