Page 1
CAL METRO™ CONTACT IN FORMATION For customer service, please contact your authorized dealer immediately. If you need additional information and/or assistance, contact: Lloyd’s Material Supply Company, Inc. Customer Service Department 1462 East Ninth Street Pomona, CA 91766. Toll Free: 1-800-CAL-SPAS...
Page 2
The drawing below represents the finished product after assembly.
Page 3
Once you open your Cal Metro™ 2- Tier Steps you will find the separate pieces ready for assembly. Two long, straight pieces when joined will form your Cal Metro steps. You will need a Phillips-head screwdriver to complete the assembly.
Page 4
The step support beams are made to fit into slots on the bottom of the bench (see illustration below) Base supports...
Page 5
Begin to attach the supports underneath the top part of the 2-tier bench . (see illustration below) Use the screws to secure the support beams to the base underneath the bench. Screws Base supports...
Page 6
Be sure to secure the first support beam to the bottom of the steps...
Page 7
be sure to secure both sides of the support beam that fits into the center support base Support beam Center support base...
Page 8
be sure to secure both sides of the support beam that fits into the center support base...
Page 9
As the supports are secured, they will look like the illustration below...
Page 13
The bench wedges to support the beams at the bottom will fit at the base of the steps. (please see picture below) Support Wedge...
Page 14
The bench wedges to support the beams at the bottom will fit at the base of the steps. (please see picture below) Bottom view of the Cal Metro™ steps support wedge fits here use screws to secure...
Page 17
The second (lower level) of the steps are shown here with pictures of the screws and where they should be placed. screws Place screws here...
Page 18
Repeat the process for the 2nd tier of the steps and tighten all screws. Your results should look like the illustration below.
Page 19
Your completed bench will look like the illustration below when finished Please be sure that screws are tightened for a secure fit.
Page 20
CAL METRO™ CONTACT IN FORMATION For customer service, please contact your authorized dealer immediately. If you need additional information and/or assistance, contact: Lloyd’s Material Supply Company, Inc. Customer Service Department 1462 East Ninth Street Pomona, CA 91766. LTR20091088 Toll Free: 1-800-CAL-SPAS...