Summary of Contents for Ross RA650
- Page 1 Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference! RA650...
- Page 2 GENERAL SAFETY INFORMATION This product is a part of a high pressure system and the following safety precautions must be followed at all times along with any other existing safety rules. 1. Read all manuals included with these product carefully. Be thoroughly familiar with the controls and the proper use of the equipment.
- Page 3 TECHNICAL SPECIFICATIONS No-Load Speed in workshop 1,800rpm Air Consumption 108L/min(3.8cfm) Chuck Capacity 3/8” (keyless) Weight 1.1kg (2.42lb) Working Air Pressure 6.2bar (90psi) Air Inlet ¼” BSP USE SINGLE ENDED DRILL BITS ONLY Double ended drill will damage the chuck and void you warranty. TO INSTALL A DRILL BIT: Hold the ring and turn the sleeve clockwise until drill bit is secured...
- Page 4 Should service become necessary during the warranty period, the purchaser should contact an Authorised Service Centre or J W Ross. In order to obtain warranty service, the purchaser must present the store receipt showing the name of the retailer and the date of purchase.
Need help?
Do you have a question about the RA650 and is the answer not in the manual?
Questions and answers