Hdmi Arc (Audio Return Channel) - JVC LT-24C660 Instruction Manual

HDMI ARC (Audio Return Channel)

The ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to ARC-compliant audio devices
(e.g. soundbar) through a single HDMI connection.
Make sure CEC is enabled when using
an ARC-compliant device.
HDMI-ARC Connection
To enjoy the ARC function, please ensure your ARC-compliant audio devices are connected by an HDMI cable that support the
ARC function to the HDMI 1(ARC) port of your ARC-compliant TV. When correctly set up, you can use your TV remote control to
adjust the volume output (VOL +/– and MUTE) of the connected audio device.
1. Make sure your TV and ARC-compliant device are disconnected from the
main and switched off.
2. Connect your ARC-compliant device to your TV making sure you use the
HDMI1 (ARC) socket on the back of the TV. The plug in and switch on at
the mains.
3. Press the MENU button and then press the
SETTINGS and then press the OK button.
4. Press the buttons to select MORE then press OK.
5. Press the
buttons to select SPEAKERS then press the
select AMPLIFIER. It may take up to 15 seconds before you hear sound
from your external speaker, this is normal.
You will now be able to use your TV remote control to adjust the volume of
your external speaker and the speaker will also switch into on/standby when
you switch your TV on and off.
LT-24C660/661(B)_IB.indd 43
LAN
VGA
SPDIF SPDIF VGA
Coax.OUT Coax.OUT
SCART SCART
buttons to select the
buttons to
Other Information
LAN
VGA
SPDIF
Coax.OUT
SCART
ARC enabled devices MUST
be connected to the socket
marked HDMI 1 (ARC).
External speaker e.g. Soundbar
7
43
26/04/2017 16:22